readme.md (1596B)
1 # subrezon/lancer 2 3 The [Lancer](https://github.com/subrezon/lancer) is a 36-key ortholinear keyboard with a light split and a focus on compact footprint and portability. It is a direct successor to [la_nc](https://github.com/subrezon/la_nc), and is very much inspired by other keyboards like Planck, Lumberjack and Lesovoz. Powered by a Pro Micro compatible MCU board and featuring battery and nice!view support, it offers a simple and productive typing experience, both with and without the wire. 4 5  6 7 * Keyboard Maintainer: [Daniel Osipishin](https://github.com/subrezon) 8 * Hardware Supported: Lancer PCB, with a ProMicro or other compatible MCU board 9 * Hardware Availability: https://github.com/subrezon/lancer 10 11 Make example for this keyboard (after setting up your build environment): 12 13 make subrezon/lancer:default 14 15 Flashing example for this keyboard: 16 17 make subrezon/lancer:default:flash 18 19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 20 21 ## Bootloader 22 23 Enter the bootloader in 3 ways: 24 25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 26 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available