qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1203B)

      1 # Synth Labs 065
      2 
      3 ![065](https://i.imgur.com/1iLYrP1h.jpg)
      4 
      5 The 065 Keyboard by Synth Labs.
      6 
      7 * Keyboard Maintainer: [Nostril](https://github.com/hongaaronc)
      8 * Hardware Supported: [Synth Labs 065 Soldered + Hotswap PCB](https://github.com/0xCB-dev/SL-065-PCB)
      9 * Hardware Designer: [0xCB](https://0xcb.dev/)
     10 * Hardware Availability: Awaiting GB, or order your own parts using [the open-source PCB production files](https://github.com/0xCB-dev/SL-065-PCB)
     11 
     12 
     13 Make example for this keyboard (after setting up your build environment):
     14 
     15     make synthlabs/065:default
     16 
     17 Flashing example for this keyboard:
     18 
     19     make synthlabs/065:default:flash
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the Escape key) and plug in the keyboard
     26 * **Physical reset button**: Briefly press the button on the back of the PCB
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available