qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (980B)

      1 
      2 # TAC-K1
      3 
      4 ![tac-k1](https://i.imgur.com/3YGvrSZh.jpg)
      5 
      6 * Keyboard Maintainer: [JoyLee](https://github.com/itarze)
      7 * Hardware Supported: TAC-K1 PCB
      8 
      9 Make example for this keyboard (after setting up your build environment):
     10 
     11     make tacworks/tac_k1:default
     12 
     13 Flashing example for this keyboard:
     14 
     15     make tacworks/tac_k1:default:flash
     16 
     17 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     18 
     19 ## Bootloader
     20 
     21 Enter the bootloader in 3 ways:
     22 
     23 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     24 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     25 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available