readme.md (1556B)
1 # Baumkuchen 2 3  4 5 Baumkuchen is a 13-key macropad with a radial key layout. 6 The board can be used as a circuit or as a switch plate by cutting out the keyswitch Pro Micro part. 7 It is compatible with Cherry MX compatible keyswitches, and a rotary encoder can be optionally installed. 8 LEDs can also be mounted to make it glow. 9 The board is reversible, allowing you to choose the arrangement of keys and Pro Micro according to your usage style. 10 11 * Keyboard Maintainer: [takashicompany](https://github.com/takashicompany) 12 * Hardware Supported: Baumkuchen PCB, Pro Micro 13 * Hardware Availability: https://github.com/takashicompany/baumkuchen 14 15 Make example for this keyboard (after setting up your build environment): 16 17 make takashicompany/baumkuchen:default 18 19 Flashing example for this keyboard: 20 21 make takashicompany/baumkuchen:default:flash 22 23 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 24 25 ## Bootloader 26 27 Enter the bootloader in 3 ways: 28 29 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 30 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 31 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available