readme.md (1710B)
1 # Ejectix 2 3  4 5 Ejectix is a 36-key, low-staggered keyboard. 6 Its layout is similar to that of a conventional keyboard, making it suitable for an introductory keyboard of 30% size. 7 Its relatively simple structure makes it easy to assemble, and it is recommended for those who are just starting to build their own keyboards. 8 Since the firmware is VIA-compatible, it is possible to write the firmware and change the keymap from a web browser by using Remap. 9 The MX socket is also supported, making it easy to replace the keyswitch for long-lasting use. 10 Underglow LEDs can also be used to decorate your desk. 11 12 * Keyboard Maintainer: [takashicompany](https://github.com/takashicompany) 13 * Hardware Supported: Ejectix PCB, Pro Micro 14 * Hardware Availability: https://github.com/takashicompany/ejectix 15 16 Make example for this keyboard (after setting up your build environment): 17 18 make takashicompany/ejectix:default 19 20 21 Flashing example for this keyboard: 22 23 make takashicompany/ejectix:default:flash 24 25 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 26 27 ## Bootloader 28 29 Enter the bootloader in 3 ways: 30 31 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 32 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 33 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available