qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1341B)

      1 # qoolee
      2 
      3 ![qoolee](https://github.com/takashicompany/qoolee/raw/master/images/qmk.jpg?raw=true)
      4 
      5 QooLee is a keyboard with a 30% layout with ISO Enter.
      6 It can also be equipped with a rotary encoder.
      7 It supports hot-swapping of keyswitches with MX sockets and mounting of LEDs.
      8 VIA (Remap) firmware is also available.
      9 
     10 * Keyboard Maintainer: [takashicompany](https://github.com/takashicompany)
     11 * Hardware Supported: PCB, Pro Micro
     12 * Hardware Availability: https://github.com/takashicompany/qoolee
     13 
     14 Make example for this keyboard (after setting up your build environment):
     15 
     16     make takashicomoany/qoolee:default
     17 
     18 Flashing example for this keyboard:
     19 
     20     make takashicompany/qoolee:default:flash
     21 
     22 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     23 
     24 ## Bootloader
     25 
     26 Enter the bootloader in 3 ways:
     27 
     28 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     29 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     30 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available