qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1475B)

      1 # Radialex
      2 
      3 ![Radialex](https://github.com/takashicompany/radialex/blob/master/images/qmk.jpg?raw=true)
      4 
      5 40% larger keyboard.  
      6 The radial key layout allows you to place your hand in a natural position and move your fingers the shortest distance to type.  
      7 Your iconic keys and keycaps can be placed in the center of the keyboard.  
      8 It is possible to make it shine with LED backlighting.  
      9 The keyswitches can also be replaced with MX sockets.  
     10 
     11 * Keyboard Maintainer: [takashicompany](https://github.com/takashicompany)
     12 * Hardware Supported: PCB, Pro Micro
     13 * Hardware Availability: https://github.com/takashicompany/radialex
     14 
     15 Make example for this keyboard (after setting up your build environment):
     16 
     17     make takashicompany/radialex:default
     18 
     19 Flashing example for this keyboard:
     20 
     21     make takashicompany/radialex:default:flash
     22 
     23 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     24 
     25 ## Bootloader
     26 
     27 Enter the bootloader in 3 ways:
     28 
     29 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     30 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     31 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available