qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1399B)

      1 # takashicompany/tightwriter
      2 
      3 ![Tightwriter](https://i.imgur.com/evVMdSRh.jpg)
      4 
      5 Tightwriter is a 35-key keyboard.
      6 The PCB is compatible with Cherry MX compatible key switches and Kailh Choc v1 key switches.
      7 It can be equipped with backlight LEDs and a TRRS socket.
      8 
      9 * Keyboard Maintainer: [takashicompany](https://github.com/takashicompany)
     10 * Hardware Supported: PCB, Pro Micro
     11 * Hardware Availability: https://github.com/takashicompany/tightwriter
     12 
     13 Make example for this keyboard (after setting up your build environment):
     14 
     15 caterina:
     16     make takashicompany/tightwriter:default
     17 
     18 Many popular Pro Micro alternatives like the Elite-C, Bit-C, Sea-Micro, Puchi-C etc...
     19     make takashicompany/tightwriter:default:dfu
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     22 
     23 ## Bootloader
     24 
     25 Enter the bootloader in 3 ways:
     26 
     27 - Bootmagic reset: Hold down the top-left key and plug in the keyboard. This will also clear EEPROM, so it is a good first step if the keyboard is misbehaving.
     28 - Physical reset button: Briefly press the button on the back of the PCB.
     29 - Keycode in layout: Press the key mapped to QK_BOOT. In the pre-supplied keymaps it is on the ninth layer, replacing the N key.