qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (998B)

      1 # Udon:13
      2 
      3 ![Udon13](https://i.imgur.com/DppYeTCh.jpg)
      4 
      5 *The Udon:13 is a 12 hotswap key macro keypad with a push button encoder knob and 128x32 OLED display*
      6 
      7 * Keyboard Maintainer: [The Mad Noodle](https://github.com/The-Mad-Noodle)
      8 * Hardware Supported: Udon:13 PCB
      9 * Hardware Availability: https://www.madnoodleprototypes.com/shop
     10 
     11 
     12 Compile example for this keyboard (after setting up your build environment):
     13 
     14     qmk compile -kb themadnoodle/udon13 -km default
     15 
     16 Flashing example for this keyboard:
     17 
     18     qmk flash -kb themadnoodle/udon13 -km default
     19 
     20 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     21 
     22 ## Bootloader & Flashing
     23 
     24 
     25 **Physical reset button**: 
     26 
     27 * Press the physical button located on the top left of the back of the PCB (Labeled RST) to enter Bootloader Mode