qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1192B)

      1 # Adalyn
      2 
      3 ![Adalyn](https://i.imgur.com/3mGQlh2.jpg)
      4 
      5 *A cool QAZ-Alice hybrid designed by [Marv](https://github.com/MarvFPV/Adalyn) with a PCB by [tominabox1](https://github.com/tominabox1)*
      6 * Keyboard Maintainer: [tominabox1](https://github.com/tominabox1)
      7 * Hardware Supported: Adalyn PCB, atmega32u4
      8 * Hardware Availability: Open source on @tominabox1 GitHub
      9 
     10 Make example for this keyboard (after setting up your build environment):
     11     make tominabox1/adalyn:default
     12 Flashing example for this keyboard:
     13     make tominabox1/adalyn:default:flash
     14 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     15 ## Bootloader
     16 Enter the bootloader in 3 ways:
     17 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     18 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     19 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available