qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1290B)

      1 # Tyson65
      2 
      3 ![trnthsn/tyson65](https://live.staticflickr.com/65535/54831930681_bf79fb1761_c.jpg)
      4 
      5 A 65% keyboard PCB compatible with various keyboard cases. Supports a middle USB Type-C connector, 5 JST SH1.0 and 2 JST ZH1.25 positions for a daughter board.
      6 
      7 * Keyboard Maintainer: [Trnthsn](https://github.com/trnthsn)
      8 * Hardware Supported: STM32, Tyson65
      9 * Hardware Availability: [ThanhSon.Mech](https://www.facebook.com/ThanhSon.mech)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make trnthsn/tyson65/stm32f103:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make trnthsn/tyson65/stm32f103:default:flash
     18 
     19 
     20 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     21 
     22 ## Bootloader
     23 
     24 Enter the bootloader in 3 ways:
     25 
     26 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     27 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     28 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available