qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1398B)

      1 # gok TypeK QMK Firmware Folder
      2 
      3 ![TK](https://i.imgur.com/0ZEbEZt.jpg)
      4 
      5 ## Introduction
      6 
      7 This is the QMK Firmware repository for the Type K, the tented ergo by Gok. The TypeK went through GB on August, 2023. It is supported by a proprietary PCB ecosystem.
      8 
      9 ## How to flash
     10 
     11 ### Enter bootloader
     12 
     13 The DFU state in the bootloader can be accessed in 3 ways:
     14 
     15 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key, escape in the default keymap) and plug in the keyboard;
     16 * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds;
     17 * **Keycode in layout**: Press the key mapped to `RESET`; in the default layout, that is top left key ('escape') in layer 1.
     18 
     19 ### How to compile and flash
     20 
     21 
     22 After setting up your build environment, you can compile the Iron 165R2 default keymap by using one of the options below.
     23 
     24     make typek:default
     25 
     26 And use dfu-util in the command line or through a GUI like QMK toolbox to upload the firmware to the PCB. To directly flash the PCB after it is put into a DFU state, use:
     27 
     28     make typek:default:flash
     29 
     30 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).