qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1125B)

      1 # Djinn
      2 
      3 ![Djinn](https://i.imgur.com/ArSjkv8.jpg)
      4 
      5 The Djinn is a 64-key split keyboard -- dual 4x7 with a 4-key thumb cluster and encoders. It also has a 5-way tactile switch under the thumb. Oh, and two displays.
      6 
      7 Keyboard Maintainer: [tzarc](https://github.com/tzarc)  
      8 Hardware Supported: Djinn: rev1, rev2  
      9 Hardware Availability: [Open-source](https://github.com/tzarc/djinn)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make tzarc/djinn/rev2:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make tzarc/djinn/rev2:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the top-left key and plug in the keyboard.
     26 * **Physical reset button**: Briefly press the button on the back of the PCB.
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.