qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1239B)

      1 # Ghoul
      2 
      3 ![Ghoul](https://i.imgur.com/T8wp7cEh.jpg)
      4 
      5 Planck-like development board for QMK, using SparkFun MicroMod for hot-swap MCU capability.
      6 
      7 * Keyboard Maintainer: [tzarc](https://github.com/tzarc)
      8 * Hardware Supported: Ghoul rev1 PCB + MicroMod STM32, MicroMod RP2040
      9 * Hardware Availability: [Open-source](https://github.com/tzarc/ghoul)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make tzarc/ghoul/rev1/stm32:default
     14     make tzarc/ghoul/rev1/rp2040:default
     15 
     16 Flashing example for this keyboard:
     17 
     18     make tzarc/ghoul/rev1/stm32:default:flash
     19     make tzarc/ghoul/rev1/rp2040:default:flash
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     22 
     23 ## Bootloader
     24 
     25 Enter the bootloader in 3 ways:
     26 
     27 * **Bootmagic reset**: Hold down the top-left key (usually Escape) and plug in the keyboard
     28 * **Physical reset button**: Either press all 5 left-most keys on the bottom row, or hold `BOOT` and press `RESET`
     29 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available