qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1241B)

      1 # Kobold
      2 
      3 ![Kobold](https://i.imgur.com/R8nDodO.jpg)
      4 
      5 4x4 macropad running QMK, in the same form factor as a bm16s. Non-standard Choc key spacing.
      6 
      7 North-facing RGB, SPI NOR Flash, voltage and current measurement, direct pin matrix, reset to bootloader by holding top 4 keys.
      8 
      9 * Keyboard Maintainer: [tzarc](https://github.com/tzarc)
     10 * Hardware Supported: Kobold, r1
     11 * Hardware Availability: [KiCad files](https://github.com/tzarc/keyboards/tree/main/Kobold)
     12 
     13 Make example for this keyboard (after setting up your build environment):
     14 
     15     make tzarc/kobold/r1:default
     16 
     17 Flashing example for this keyboard:
     18 
     19     make tzarc/kobold/r1:default:flash
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     22 
     23 ## Bootloader
     24 
     25 Enter the bootloader in 3 ways:
     26 
     27 * **Bootmagic reset**: Hold down the top left key and plug in the keyboard
     28 * **Physical reset button**: Simultaneously press the top four keys, or press the physical button on the back marked 'D'.
     29 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available