qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1212B)

      1 # UMBRA
      2 
      3 ![UMBRA](https://i.imgur.com/2d94i6H.jpg)
      4 
      5 A multi-mount 60% keyboard with PCB choice featuring popular layouts, underglow, and rotary option.
      6 
      7 * Keyboard Maintainer: [IV Works](https://www.iv-works.com/)
      8 * Hardware Supported: [UMBRA](https://www.iv-works.com/i)
      9 * Hardware Availability: [Shop](https://iv-works.com/product-category/umbra/)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make umbra/hotswap:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make umbra/hotswap:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 How to enter bootloader (DFU):
     24 * PCB will arrive flashed. With USB plugged in press Fn+Esc to enter DFU. Flash the firmware and replug the USB cable to fresh boot the PCB.
     25 
     26 * If that method fails please locate the RESET header on the back of the PCB just right of the MCU. Short the 2 plated holes for 2 seconds to enter DFU. Flash the firmware and replug the USB cable to fresh boot the PCB.