qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1227B)

      1 # Viendi8L PCB firmware
      2 
      3 ![8L_image](https://imgur.com/z4cuSYJh.png)
      4 
      5 The 8L 80% (60% plus southpaw numpad) keyboard designed by Viendi, with PCB by Gondolindrim.
      6 
      7 * Keyboard Maintainer: [Gondolindrim](https://github.com/gondolindrim)
      8 * Hardware Availability: proprietary PCB
      9 * Website: [Viendi](https://viendi.co/)
     10 
     11 ## How to flash
     12 
     13 ### Enter bootloader
     14 
     15 * **Bootmagic reset**: hold down the key at (0,0) in the matrix (the encoder push) and plug in the keyboard, waiting for five seconds
     16 * **Physical reset button**: press the button on the front of the PCB or use pliers to short the reset contacts, for at least five seconds
     17 * **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout)
     18 
     19 ## Compile firmware
     20 
     21 After accessing the DFU state in your PCB, build the default layout using:
     22 
     23     make viendi8l:default
     24 
     25 Then download the resulting binary `*bin` file using `dfu-util` or QMK Toolbox.
     26 
     27 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).