qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1211B)

      1 # VoidHHKB-Hotswap
      2 
      3 ![VoidHHKB-Hotswap)](https://i.imgur.com/dxTs8gB.jpeg)
      4 
      5 VoidHHKB-Hotswap 60% PCB designed for the [HSKB project](https://github.com/Dev01-D/HSKB).
      6 
      7 *   Keyboard Maintainer: [James Wilson](https://github.com/JamesWilson1996)
      8 *   Hardware Supported: STM32F072CBT6
      9 *   Hardware Availability: [HSKB](https://github.com/Dev01-D/HSKB)
     10 
     11 # Compiling
     12 
     13 Make example for this keyboard (after setting up your build environment):
     14 
     15     make void/voidhhkb_hotswap:default
     16 
     17 Flashing example for this keyboard:
     18 
     19     make void/voidhhkb_hotswap:default:flash
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     22 
     23 # Bootloader
     24 
     25 Enter the bootloader in 3 ways:
     26 
     27 *   **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     28 *   **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     29 *   **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available