config.h (2827B)
1 /* Copyright 2020 Jason Williams (Wilba) 2 * 3 * This program is free software: you can redistribute it and/or modify 4 * it under the terms of the GNU General Public License as published by 5 * the Free Software Foundation, either version 2 of the License, or 6 * (at your option) any later version. 7 * 8 * This program is distributed in the hope that it will be useful, 9 * but WITHOUT ANY WARRANTY; without even the implied warranty of 10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 * 13 * You should have received a copy of the GNU General Public License 14 * along with this program. If not, see <http://www.gnu.org/licenses/>. 15 */ 16 #pragma once 17 18 // IS31FL3731 driver 19 #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND 20 #define IS31FL3731_LED_COUNT 12 21 22 // Enable WT RGB backlight 23 #define RGB_BACKLIGHT_ENABLED 1 24 25 // This conditionally compiles the backlight code for M10-C specifics 26 #define RGB_BACKLIGHT_M10_C 27 28 // enable/disable LEDs based on layout 29 #define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0 30 #define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 31 #define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 32 #define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 33 #define RGB_BACKLIGHT_USE_ISO_ENTER 0 34 #define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 35 36 // disable backlight when USB suspended (PC sleep/hibernate/shutdown) 37 #define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0 38 39 // disable backlight after timeout in minutes, 0 = no timeout 40 #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 41 42 // the default brightness 43 #define RGB_BACKLIGHT_BRIGHTNESS 255 44 45 // the default effect (RGB test) 46 #define RGB_BACKLIGHT_EFFECT 255 47 48 // the default effect speed (0-3) 49 #define RGB_BACKLIGHT_EFFECT_SPEED 0 50 51 // the default color1 and color2 52 #define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } 53 #define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } 54 55 // These define which keys in the matrix are alphas/mods 56 // Used for backlight effects so colors are different for 57 // alphas vs. mods 58 // Each value is for a row, bit 0 is column 0 59 // Alpha=0 Mod=1 60 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000000 61 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000000 62 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0000000000000000 63 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0000000000000000 64 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0000000000000000 65 66 #define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } 67 #define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } 68 #define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } 69 #define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } 70 71 // Backlight config starts after VIA's EEPROM usage, 72 // dynamic keymaps start after this. 73 #define VIA_EEPROM_CUSTOM_CONFIG_SIZE 51