config.h (2922B)
1 /* Copyright 2020 Jason Williams (Wilba) 2 * 3 * This program is free software: you can redistribute it and/or modify 4 * it under the terms of the GNU General Public License as published by 5 * the Free Software Foundation, either version 2 of the License, or 6 * (at your option) any later version. 7 * 8 * This program is distributed in the hope that it will be useful, 9 * but WITHOUT ANY WARRANTY; without even the implied warranty of 10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 * 13 * You should have received a copy of the GNU General Public License 14 * along with this program. If not, see <http://www.gnu.org/licenses/>. 15 */ 16 17 #pragma once 18 19 // IS31FL3731 driver 20 #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND 21 #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA 22 #define IS31FL3731_LED_COUNT 72 23 24 #define RGB_BACKLIGHT_ENABLED 1 25 26 // This conditionally compiles the backlight code for wT60-B specifics 27 #define RGB_BACKLIGHT_WT60_B 28 29 // enable/disable LEDs based on layout 30 // they aren't really used if RGB_BACKLIGHT_WT60_B defined 31 #define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0 32 #define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 33 #define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 34 #define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 35 #define RGB_BACKLIGHT_USE_ISO_ENTER 0 36 #define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 37 38 // disable backlight when USB suspended (PC sleep/hibernate/shutdown) 39 #define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0 40 41 // disable backlight after timeout in minutes, 0 = no timeout 42 #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 43 44 // the default brightness 45 #define RGB_BACKLIGHT_BRIGHTNESS 255 46 47 // the default effect (RGB test) 48 #define RGB_BACKLIGHT_EFFECT 255 49 50 // the default effect speed (0-3) 51 #define RGB_BACKLIGHT_EFFECT_SPEED 0 52 53 // the default color1 and color2 54 #define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } 55 #define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } 56 57 // These define which keys in the matrix are alphas/mods 58 // Used for backlight effects so colors are different for 59 // alphas vs. mods 60 // Each value is for a row, bit 0 is column 0 61 // Alpha=0 Mod=1 62 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001 63 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0010000000000001 64 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001 65 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001 66 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111 67 68 #define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } 69 #define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } 70 #define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } 71 #define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } 72 73 // Backlight config starts after VIA's EEPROM usage, 74 // dynamic keymaps start after this. 75 #define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31