readme.md (1290B)
1 # YMDK YMD62 ISO 2 3 A 60% PCB supporting the ISO layout, with hotswap sockets, backlit keys and underglow. 4 5 * Keyboard Maintainer: [Richard Dawe](https://github.com/richdawe) 6 * Hardware Supported: YMD62 PCB 7 * Hardware Availability: [YMDK](https://ymdkey.com/products/ymd62-iso-rgb-hot-swap-pcb-fully-programmable-support-via-vial) 8 9 Make example for this keyboard (after setting up your build environment): 10 11 make ymdk/ymd62:default 12 13 Flashing example for this keyboard: 14 15 make ymdk/ymd62:default:flash 16 17 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 18 19 ## Bootloader 20 21 Enter the bootloader in 3 ways: 22 23 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 24 * **Physical reset button**: Double-tap the reset button on the back of the PCB 25 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available 26 27 Note: The device does not reconnect automatically after the QMK firmware has been flashed. 28 Wait for the USB device to disappear after writing firmware, then unplug and re-plug it.