readme.md (1304B)
1 # YMD75 / MT84 2 3 75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides. 4 5 This firmware can also be flashed onto the KBDFans KBD75 Round 2 Bootmapper Client boards sold during the mid-2018 timeframe. 6 7 * Keyboard Maintainer: [Wayne K Jones](github.com/WarmCatUK) 8 * Hardware Supported: rev1 (ATmega32a) 9 * Hardware Availability: <https://www.aliexpress.com/item/32812690592.html> 10 11 Make example for this keyboard (after setting up your build environment): 12 13 make ymdk/ymd75/rev1:default 14 15 Flashing example for this keyboard: 16 17 make ymdk/ymd75/rev1:default:flash 18 19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 20 21 ## Bootloader 22 23 Enter the bootloader in 3 ways: 24 25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 26 * **Reset Key**: Hold down the key located at *Key below the top right key*, commonly programmed as *Backspace* while plugging in the keyboard. 27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available