qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1229B)

      1 # Lunakey Pico
      2 
      3 ![lunakey_pico](https://i.imgur.com/S5N8AFhh.jpg)
      4 
      5 This is a 40% split keyboard which has 3x6 vertically staggered keys and 4 thumbnail keys.
      6 
      7 * Keyboard Maintainer: [Yoichiro Tanaka](https://github.com/yoichiro)
      8 * Hardware Supported: Lunakey Pico PCB, Raspberry Pi Pico MCU.
      9 * Hardware Availability: https://booth.pm/ja/items/3324672
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     qmk compile -kb yoichiro/lunakey_pico -km default
     14 
     15 Flashing example for this keyboard:
     16 
     17     qmk flash -kb yoichiro/lunakey_pico -km default -bl avrdude
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     26 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available