qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1314B)

      1 # navpad 1.0 with Helix (Right hand side)
      2 
      3 ![10_helix_r](https://imgur.com/ehTI37h.jpg)
      4 
      5 Navpad connected with helix keyboard (Right Side)
      6 
      7 * Keyboard Maintainer: [yushakobo](https://github.com/yushakobo)
      8 * Hardware Supported: Navpad 1.0 PCB and Helix PCB, Pro Micro
      9 * Hardware Availability: https://shop.yushakobo.jp/products/navpad-10
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12     
     13     make yushakobo/navpad/10_helix_r:default
     14 
     15 Flashing examples for this keyboard...
     16 
     17 Helix side:
     18     
     19     make yushakobo/navpad/10_helix_r:default:avrdude-split-right
     20     
     21 Navpad side:
     22 
     23     make yushakobo/navpad/10_helix_r:default:avrdude-split-left
     24 
     25 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     26 
     27 ## Bootloader
     28 
     29 Enter the bootloader in 3 ways:
     30 
     31 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     32 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     33 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available