qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1284B)

      1 # FUYU HOTSWAP
      2 
      3 ![FUYU HS 7U](https://i.imgur.com/8zjDNJT.jpg)
      4 
      5 An F12 TKL Hotswappable H87-Compat Type-C PCB for the Geon F1-8K
      6 
      7 * Keyboard Maintainer: [Zykrah](https://github.com/zykrah)
      8 * Hardware Supported: Fuyu HS 7u rev1, Fuyu HS 6.25u rev1
      9 * Hardware Availability: [Github Repo](https://github.com/zykrah/fuyu), [GEON Store](https://geon.works/products/fuyu-pcb-for-f1-8k), [Cafege](https://cafege.com.au/products/fuyu-8k-pcb)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make zykrah/fuyu_hs:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make zykrah/fuyu_hs:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     26 * **Physical reset button**: Briefly short the `RST` and `GND` pads on the SWD header twice, or short the `BOOT` header and plug in keyboard
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available