1 files changed, 0 insertions, 46 deletions
diff --git a/layouts/community/ortho_4x12/wanleg/readme.md b/layouts/community/ortho_4x12/wanleg/readme.md
deleted file mode 100644
index 3fc1fc65ad..0000000000
--- a/layouts/community/ortho_4x12/wanleg/readme.md
+++ /dev/null
@@ -1,46 +0,0 @@
-# Let's Split Flashing  
-(More information at `qmk_firmware/layouts/community/ortho_3x10/wanleg/readme.md`)
-## Make the QMK DFU .hex
-`make lets_split/rev2:wanleg:production dfu=qmk` 
-
-## Burning EEPROM settings and Firmware
-Navigate to the directory with your .hex file and the `eeprom-lefthand.eep` and `eeprom-righthand.eep` files in it.  
-**Burn Left Side With QMK DFU and Firmware**  
-`avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U eeprom:w:eeprom-lefthand.eep -P comPORT -U flash:w:YOUR_production.hex:a`  
-
-**Burn Right Side With QMK DFU and Firmware**  
-`avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U eeprom:w:eeprom-righthand.eep -P comPORT -U flash:w:YOUR_production.hex:a`  
-
-Change `comPORT` to whatever port is used by the Arduino (e.g. `com11` in Windows or `/dev/ttyACM0` in Linux). Use Device Manager in Windows to find the port being used. Use `ls /dev/tty*` in Linux. Change `YOUR_production.hex` to whatever you've created in the previous step.
-
-## Using QMK DFU  
-Once QMK DFU is burned to your ProMicro, you can then flash subsequent hex files with
-`make lets_split/rev2:<keymap>:dfu dfu=qmk`  
-The `dfu=qmk` conditional will set `BOOTLOADER = qmk-dfu` instead of `BOOTLOADER = caterina`  
-
-# Let's Split LEDs  
-In `qmk_firmware/keyboards/lets_split/rev2/rev2.c`, replace contents with 
-```  
-#include "lets_split.h"
-
-void matrix_init_kb(void) {
-
-    // // green led on
-    // DDRD |= (1<<5);
-    // PORTD &= ~(1<<5);
-
-    // // orange led on
-    // DDRB |= (1<<0);
-    // PORTB &= ~(1<<0);
-	
-	//turn off LEDs on ProMicro
-   DDRD &= ~(1<<5);
-   PORTD &= ~(1<<5);
-
-   DDRB &= ~(1<<0);
-   PORTB &= ~(1<<0);
-
-	matrix_init_user();
-};
-```  
-to turn off LEDs