1 files changed, 0 insertions, 111 deletions
diff --git a/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/mcuconf.h
deleted file mode 100644
index 8621807cbb..0000000000
--- a/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/mcuconf.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2021 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * RP2040_MCUCONF drivers configuration.
- *
- * IRQ priorities:
- * 3...0        Lowest...Highest.
- *
- * DMA priorities:
- * 0...1        Lowest...Highest.
- */
-
-#define RP2040_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define RP_NO_INIT                          FALSE
-#define RP_CORE1_START                      FALSE
-#define RP_CORE1_VECTORS_TABLE              _vectors
-#define RP_CORE1_ENTRY_POINT                _crt0_c1_entry
-#define RP_CORE1_STACK_END                  __c1_main_stack_end__
-
-/*
- * IRQ system settings.
- */
-#define RP_IRQ_SYSTICK_PRIORITY             2
-#define RP_IRQ_TIMER_ALARM0_PRIORITY        2
-#define RP_IRQ_TIMER_ALARM1_PRIORITY        2
-#define RP_IRQ_TIMER_ALARM2_PRIORITY        2
-#define RP_IRQ_TIMER_ALARM3_PRIORITY        2
-#define RP_IRQ_ADC1_PRIORITY                3
-#define RP_IRQ_UART0_PRIORITY               3
-#define RP_IRQ_UART1_PRIORITY               3
-#define RP_IRQ_SPI0_PRIORITY                2
-#define RP_IRQ_SPI1_PRIORITY                2
-#define RP_IRQ_USB0_PRIORITY                3
-#define RP_IRQ_I2C0_PRIORITY                2
-#define RP_IRQ_I2C1_PRIORITY                2
-
-/*
- * ADC driver system settings.
- */
-#define RP_ADC_USE_ADC1                     TRUE
-
-/*
- * SIO driver system settings.
- */
-#define RP_SIO_USE_UART0                    TRUE
-#define RP_SIO_USE_UART1                    FALSE
-
-/*
- * SPI driver system settings.
- */
-#define RP_SPI_USE_SPI0                     TRUE
-#define RP_SPI_USE_SPI1                     FALSE
-#define RP_SPI_SPI0_RX_DMA_CHANNEL          RP_DMA_CHANNEL_ID_ANY
-#define RP_SPI_SPI0_TX_DMA_CHANNEL          RP_DMA_CHANNEL_ID_ANY
-#define RP_SPI_SPI1_RX_DMA_CHANNEL          RP_DMA_CHANNEL_ID_ANY
-#define RP_SPI_SPI1_TX_DMA_CHANNEL          RP_DMA_CHANNEL_ID_ANY
-#define RP_SPI_SPI0_DMA_PRIORITY            1
-#define RP_SPI_SPI1_DMA_PRIORITY            1
-#define RP_SPI_DMA_ERROR_HOOK(spip)
-
-/*
- * PWM driver system settings.
- */
-#define RP_PWM_USE_PWM0                     FALSE
-#define RP_PWM_USE_PWM1                     FALSE
-#define RP_PWM_USE_PWM2                     FALSE
-#define RP_PWM_USE_PWM3                     FALSE
-#define RP_PWM_USE_PWM4                     FALSE
-#define RP_PWM_USE_PWM5                     FALSE
-#define RP_PWM_USE_PWM6                     FALSE
-#define RP_PWM_USE_PWM7                     FALSE
-#define RP_PWM_IRQ_WRAP_NUMBER_PRIORITY     3
-
-/*
- * I2C driver system settings.
- */
-#define RP_I2C_USE_I2C0                     FALSE
-#define RP_I2C_USE_I2C1                     TRUE
-#define RP_I2C_BUSY_TIMEOUT                 50
-#define RP_I2C_ADDRESS_MODE_10BIT           FALSE
-
-/*
- * USB driver system settings.
- */
-#define RP_USB_USE_USBD0                    TRUE
-#define RP_USB_FORCE_VBUS_DETECT            TRUE
-#define RP_USE_EXTERNAL_VBUS_DETECT         FALSE
-#define RP_USB_USE_ERROR_DATA_SEQ_INTR      FALSE
-
-#endif /* MCUCONF_H */