diff options
Diffstat (limited to 'platforms/chibios/boards/QMK_BLOK/configs/mcuconf.h')
| -rw-r--r-- | platforms/chibios/boards/QMK_BLOK/configs/mcuconf.h | 111 |
1 files changed, 0 insertions, 111 deletions
diff --git a/platforms/chibios/boards/QMK_BLOK/configs/mcuconf.h b/platforms/chibios/boards/QMK_BLOK/configs/mcuconf.h deleted file mode 100644 index 0c2ef592d6..0000000000 --- a/platforms/chibios/boards/QMK_BLOK/configs/mcuconf.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2021 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * RP2040_MCUCONF drivers configuration. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...1 Lowest...Highest. - */ - -#define RP2040_MCUCONF - -/* - * HAL driver system settings. - */ -#define RP_NO_INIT FALSE -#define RP_CORE1_START FALSE -#define RP_CORE1_VECTORS_TABLE _vectors -#define RP_CORE1_ENTRY_POINT _crt0_c1_entry -#define RP_CORE1_STACK_END __c1_main_stack_end__ - -/* - * IRQ system settings. - */ -#define RP_IRQ_SYSTICK_PRIORITY 2 -#define RP_IRQ_TIMER_ALARM0_PRIORITY 2 -#define RP_IRQ_TIMER_ALARM1_PRIORITY 2 -#define RP_IRQ_TIMER_ALARM2_PRIORITY 2 -#define RP_IRQ_TIMER_ALARM3_PRIORITY 2 -#define RP_IRQ_ADC1_PRIORITY 3 -#define RP_IRQ_UART0_PRIORITY 3 -#define RP_IRQ_UART1_PRIORITY 3 -#define RP_IRQ_SPI0_PRIORITY 2 -#define RP_IRQ_SPI1_PRIORITY 2 -#define RP_IRQ_USB0_PRIORITY 3 -#define RP_IRQ_I2C0_PRIORITY 2 -#define RP_IRQ_I2C1_PRIORITY 2 - -/* - * ADC driver system settings. - */ -#define RP_ADC_USE_ADC1 TRUE - -/* - * SIO driver system settings. - */ -#define RP_SIO_USE_UART0 FALSE -#define RP_SIO_USE_UART1 FALSE - -/* - * SPI driver system settings. - */ -#define RP_SPI_USE_SPI0 TRUE -#define RP_SPI_USE_SPI1 FALSE -#define RP_SPI_SPI0_RX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY -#define RP_SPI_SPI0_TX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY -#define RP_SPI_SPI1_RX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY -#define RP_SPI_SPI1_TX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY -#define RP_SPI_SPI0_DMA_PRIORITY 1 -#define RP_SPI_SPI1_DMA_PRIORITY 1 -#define RP_SPI_DMA_ERROR_HOOK(spip) - -/* - * PWM driver system settings. - */ -#define RP_PWM_USE_PWM0 FALSE -#define RP_PWM_USE_PWM1 FALSE -#define RP_PWM_USE_PWM2 FALSE -#define RP_PWM_USE_PWM3 FALSE -#define RP_PWM_USE_PWM4 FALSE -#define RP_PWM_USE_PWM5 FALSE -#define RP_PWM_USE_PWM6 FALSE -#define RP_PWM_USE_PWM7 FALSE -#define RP_PWM_IRQ_WRAP_NUMBER_PRIORITY 3 - -/* - * I2C driver system settings. - */ -#define RP_I2C_USE_I2C0 TRUE -#define RP_I2C_USE_I2C1 FALSE -#define RP_I2C_BUSY_TIMEOUT 50 -#define RP_I2C_ADDRESS_MODE_10BIT FALSE - -/* - * USB driver system settings. - */ -#define RP_USB_USE_USBD0 TRUE -#define RP_USB_FORCE_VBUS_DETECT TRUE -#define RP_USE_EXTERNAL_VBUS_DETECT FALSE -#define RP_USB_USE_ERROR_DATA_SEQ_INTR FALSE - -#endif /* MCUCONF_H */ |