diff options
Diffstat (limited to 'platforms/chibios/boards/QMK_PM2040/configs')
5 files changed, 0 insertions, 167 deletions
diff --git a/platforms/chibios/boards/QMK_PM2040/configs/board.h b/platforms/chibios/boards/QMK_PM2040/configs/board.h deleted file mode 100644 index 371c1a0dca..0000000000 --- a/platforms/chibios/boards/QMK_PM2040/configs/board.h +++ /dev/null @@ -1,12 +0,0 @@ -// Copyright 2022 QMK -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -#include_next <board.h> - -#undef BOARD_RP_PICO_RP2040 -#define BOARD_PM2040 - -#undef BOARD_NAME -#define BOARD_NAME "Pro Micro RP2040" diff --git a/platforms/chibios/boards/QMK_PM2040/configs/chconf.h b/platforms/chibios/boards/QMK_PM2040/configs/chconf.h deleted file mode 100644 index d53f57edd9..0000000000 --- a/platforms/chibios/boards/QMK_PM2040/configs/chconf.h +++ /dev/null @@ -1,13 +0,0 @@ -// Copyright 2022 Stefan Kerkmann -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -#define CH_CFG_SMP_MODE TRUE -#define CH_CFG_ST_RESOLUTION 32 -#define CH_CFG_ST_FREQUENCY 1000000 -#define CH_CFG_INTERVALS_SIZE 32 -#define CH_CFG_TIME_TYPES_SIZE 32 -#define CH_CFG_ST_TIMEDELTA 20 - -#include_next <chconf.h> diff --git a/platforms/chibios/boards/QMK_PM2040/configs/config.h b/platforms/chibios/boards/QMK_PM2040/configs/config.h deleted file mode 100644 index ec85ae0cf4..0000000000 --- a/platforms/chibios/boards/QMK_PM2040/configs/config.h +++ /dev/null @@ -1,21 +0,0 @@ -// Copyright 2022 QMK -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -#ifndef I2C_DRIVER -# define I2C_DRIVER I2CD1 -#endif -#ifndef I2C1_SDA_PIN -# define I2C1_SDA_PIN D1 -#endif -#ifndef I2C1_SCL_PIN -# define I2C1_SCL_PIN D0 -#endif - -#ifndef RP2040_BOOTLOADER_DOUBLE_TAP_RESET -# define RP2040_BOOTLOADER_DOUBLE_TAP_RESET -#endif -#ifndef RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT -# define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 500U -#endif diff --git a/platforms/chibios/boards/QMK_PM2040/configs/halconf.h b/platforms/chibios/boards/QMK_PM2040/configs/halconf.h deleted file mode 100644 index 131386bc34..0000000000 --- a/platforms/chibios/boards/QMK_PM2040/configs/halconf.h +++ /dev/null @@ -1,10 +0,0 @@ -// Copyright 2022 QMK -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -#define HAL_USE_ADC TRUE -#define HAL_USE_I2C TRUE -#define HAL_USE_SPI TRUE - -#include_next <halconf.h> diff --git a/platforms/chibios/boards/QMK_PM2040/configs/mcuconf.h b/platforms/chibios/boards/QMK_PM2040/configs/mcuconf.h deleted file mode 100644 index 493dcf6434..0000000000 --- a/platforms/chibios/boards/QMK_PM2040/configs/mcuconf.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2021 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * RP2040_MCUCONF drivers configuration. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...1 Lowest...Highest. - */ - -#define RP2040_MCUCONF - -/* - * HAL driver system settings. - */ -#define RP_NO_INIT FALSE -#define RP_CORE1_START FALSE -#define RP_CORE1_VECTORS_TABLE _vectors -#define RP_CORE1_ENTRY_POINT _crt0_c1_entry -#define RP_CORE1_STACK_END __c1_main_stack_end__ - -/* - * IRQ system settings. - */ -#define RP_IRQ_SYSTICK_PRIORITY 2 -#define RP_IRQ_TIMER_ALARM0_PRIORITY 2 -#define RP_IRQ_TIMER_ALARM1_PRIORITY 2 -#define RP_IRQ_TIMER_ALARM2_PRIORITY 2 -#define RP_IRQ_TIMER_ALARM3_PRIORITY 2 -#define RP_IRQ_ADC1_PRIORITY 3 -#define RP_IRQ_UART0_PRIORITY 3 -#define RP_IRQ_UART1_PRIORITY 3 -#define RP_IRQ_SPI0_PRIORITY 2 -#define RP_IRQ_SPI1_PRIORITY 2 -#define RP_IRQ_USB0_PRIORITY 3 -#define RP_IRQ_I2C0_PRIORITY 2 -#define RP_IRQ_I2C1_PRIORITY 2 - -/* - * ADC driver system settings. - */ -#define RP_ADC_USE_ADC1 TRUE - -/* - * SIO driver system settings. - */ -#define RP_SIO_USE_UART0 FALSE -#define RP_SIO_USE_UART1 FALSE - -/* - * SPI driver system settings. - */ -#define RP_SPI_USE_SPI0 TRUE -#define RP_SPI_USE_SPI1 FALSE -#define RP_SPI_SPI0_RX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY -#define RP_SPI_SPI0_TX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY -#define RP_SPI_SPI1_RX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY -#define RP_SPI_SPI1_TX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY -#define RP_SPI_SPI0_DMA_PRIORITY 1 -#define RP_SPI_SPI1_DMA_PRIORITY 1 -#define RP_SPI_DMA_ERROR_HOOK(spip) - -/* - * PWM driver system settings. - */ -#define RP_PWM_USE_PWM0 FALSE -#define RP_PWM_USE_PWM1 FALSE -#define RP_PWM_USE_PWM2 FALSE -#define RP_PWM_USE_PWM3 FALSE -#define RP_PWM_USE_PWM4 FALSE -#define RP_PWM_USE_PWM5 FALSE -#define RP_PWM_USE_PWM6 FALSE -#define RP_PWM_USE_PWM7 FALSE -#define RP_PWM_IRQ_WRAP_NUMBER_PRIORITY 3 - -/* - * I2C driver system settings. - */ -#define RP_I2C_USE_I2C0 FALSE -#define RP_I2C_USE_I2C1 TRUE -#define RP_I2C_BUSY_TIMEOUT 50 -#define RP_I2C_ADDRESS_MODE_10BIT FALSE - -/* - * USB driver system settings. - */ -#define RP_USB_USE_USBD0 TRUE -#define RP_USB_FORCE_VBUS_DETECT TRUE -#define RP_USE_EXTERNAL_VBUS_DETECT FALSE -#define RP_USB_USE_ERROR_DATA_SEQ_INTR FALSE - -#endif /* MCUCONF_H */ |