1 files changed, 0 insertions, 113 deletions
diff --git a/platforms/chibios/drivers/serial_usart.h b/platforms/chibios/drivers/serial_usart.h
deleted file mode 100644
index dec8a292e9..0000000000
--- a/platforms/chibios/drivers/serial_usart.h
+++ /dev/null
@@ -1,113 +0,0 @@
-// Copyright 2021 QMK
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-#include "serial.h"
-#include <hal.h>
-
-#if defined(SOFT_SERIAL_PIN)
-#    define SERIAL_USART_TX_PIN SOFT_SERIAL_PIN
-#endif
-
-#if !defined(SERIAL_USART_TX_PIN)
-#    define SERIAL_USART_TX_PIN A9
-#endif
-
-#if !defined(SERIAL_USART_RX_PIN)
-#    define SERIAL_USART_RX_PIN A10
-#endif
-
-#if !defined(SELECT_SOFT_SERIAL_SPEED)
-#    define SELECT_SOFT_SERIAL_SPEED 1
-#endif
-
-#if defined(SERIAL_USART_SPEED)
-// Allow advanced users to directly set SERIAL_USART_SPEED
-#elif SELECT_SOFT_SERIAL_SPEED == 0
-#    define SERIAL_USART_SPEED 460800
-#elif SELECT_SOFT_SERIAL_SPEED == 1
-#    define SERIAL_USART_SPEED 230400
-#elif SELECT_SOFT_SERIAL_SPEED == 2
-#    define SERIAL_USART_SPEED 115200
-#elif SELECT_SOFT_SERIAL_SPEED == 3
-#    define SERIAL_USART_SPEED 57600
-#elif SELECT_SOFT_SERIAL_SPEED == 4
-#    define SERIAL_USART_SPEED 38400
-#elif SELECT_SOFT_SERIAL_SPEED == 5
-#    define SERIAL_USART_SPEED 19200
-#else
-#    error invalid SELECT_SOFT_SERIAL_SPEED value
-#endif
-
-#if !defined(SERIAL_USART_TIMEOUT)
-#    define SERIAL_USART_TIMEOUT 20
-#endif
-
-#if HAL_USE_SERIAL
-
-typedef SerialDriver QMKSerialDriver;
-typedef SerialConfig QMKSerialConfig;
-
-#    if !defined(SERIAL_USART_DRIVER)
-#        define SERIAL_USART_DRIVER SD1
-#    endif
-
-#elif HAL_USE_SIO
-
-typedef SIODriver QMKSerialDriver;
-typedef SIOConfig QMKSerialConfig;
-
-#    if !defined(SERIAL_USART_DRIVER)
-#        define SERIAL_USART_DRIVER SIOD1
-#    endif
-
-#endif
-
-#if !defined(USE_GPIOV1)
-/* The default PAL alternate modes are used to signal that the pins are used for USART. */
-#    if !defined(SERIAL_USART_TX_PAL_MODE)
-#        define SERIAL_USART_TX_PAL_MODE 7
-#    endif
-#    if !defined(SERIAL_USART_RX_PAL_MODE)
-#        define SERIAL_USART_RX_PAL_MODE 7
-#    endif
-#endif
-
-#if !defined(USART_CR1_M0)
-#    define USART_CR1_M0 USART_CR1_M // some platforms (f1xx) dont have this so
-#endif
-
-#if !defined(SERIAL_USART_CR1)
-#    define SERIAL_USART_CR1 (USART_CR1_PCE | USART_CR1_PS | USART_CR1_M0) // parity enable, odd parity, 9 bit length
-#endif
-
-#if !defined(SERIAL_USART_CR2)
-#    define SERIAL_USART_CR2 (USART_CR2_STOP_1) // 2 stop bits
-#endif
-
-#if !defined(SERIAL_USART_CR3)
-#    define SERIAL_USART_CR3 0
-#endif
-
-#if defined(USART1_REMAP)
-#    define USART_REMAP                             \
-        do {                                        \
-            (AFIO->MAPR |= AFIO_MAPR_USART1_REMAP); \
-        } while (0)
-#elif defined(USART2_REMAP)
-#    define USART_REMAP                             \
-        do {                                        \
-            (AFIO->MAPR |= AFIO_MAPR_USART2_REMAP); \
-        } while (0)
-#elif defined(USART3_PARTIALREMAP)
-#    define USART_REMAP                                          \
-        do {                                                     \
-            (AFIO->MAPR |= AFIO_MAPR_USART3_REMAP_PARTIALREMAP); \
-        } while (0)
-#elif defined(USART3_FULLREMAP)
-#    define USART_REMAP                                       \
-        do {                                                  \
-            (AFIO->MAPR |= AFIO_MAPR_USART3_REMAP_FULLREMAP); \
-        } while (0)
-#endif