diff options
Diffstat (limited to 'platforms/chibios/mcu_selection.mk')
| -rw-r--r-- | platforms/chibios/mcu_selection.mk | 847 |
1 files changed, 0 insertions, 847 deletions
diff --git a/platforms/chibios/mcu_selection.mk b/platforms/chibios/mcu_selection.mk deleted file mode 100644 index 5122ed4634..0000000000 --- a/platforms/chibios/mcu_selection.mk +++ /dev/null @@ -1,847 +0,0 @@ -ifneq ($(findstring MKL26Z64, $(MCU)),) - # Cortex version - MCU = cortex-m0plus - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 6 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = KINETIS - MCU_SERIES = KL2x - - # Linker script to use - # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= MKL26Z64 - - # Startup code to use - # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= kl2x - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= PJRC_TEENSY_LC -endif - -ifneq ($(findstring MK20DX128, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = KINETIS - MCU_SERIES = K20x - - # Linker script to use - # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= MK20DX128 - - # Startup code to use - # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= k20x5 - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= PJRC_TEENSY_3 -endif - -ifneq ($(findstring MK20DX256, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = KINETIS - MCU_SERIES = K20x - - # Linker script to use - # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= MK20DX256 - - # Startup code to use - # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= k20x7 - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= PJRC_TEENSY_3_1 -endif - -ifneq ($(findstring MK64FX512, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = KINETIS - MCU_SERIES = K60x - - # Linker script to use - # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= MK64FX512 - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= k60x - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= PJRC_TEENSY_3_5 -endif - -ifneq ($(findstring MK66FX1M0, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = KINETIS - MCU_SERIES = MK66F18 - - # Linker script to use - # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= MK66FX1M0 - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= MK66F18 - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= PJRC_TEENSY_3_6 -endif - -ifneq ($(findstring RP2040, $(MCU)),) - # Cortex version - MCU = cortex-m0plus - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - CHIBIOS_PORT = ARMv6-M-RP2 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = RP - MCU_SERIES = RP2040 - - # Linker script to use - # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - STARTUPLD_CONTRIB = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/ld - MCU_LDSCRIPT ?= RP2040_FLASH_TIMECRIT - LDFLAGS += -L $(STARTUPLD_CONTRIB) - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= rp2040 - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_PROMICRO_RP2040 - - # Default UF2 Bootloader settings - UF2_FAMILY ?= RP2040 - FIRMWARE_FORMAT ?= uf2 -endif - -ifneq ($(findstring STM32F042, $(MCU)),) - # Cortex version - MCU = cortex-m0 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 6 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F0xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32F042x6 - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f0xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F042X6 - - USE_FPU ?= no - - # UF2 settings - UF2_FAMILY ?= STM32F0 - - # Stack sizes: Since this chip has limited RAM capacity, the stack area needs to be reduced. - # This ensures that the EEPROM page buffer fits into RAM - USE_PROCESS_STACKSIZE = 0x600 - USE_EXCEPTIONS_STACKSIZE = 0x300 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFFC400 -endif - -ifneq ($(findstring STM32F072, $(MCU)),) - # Cortex version - MCU = cortex-m0 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 6 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F0xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32F072xB - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f0xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F072XB - - USE_FPU ?= no - - # UF2 settings - UF2_FAMILY ?= STM32F0 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFFC800 -endif - -ifneq ($(findstring STM32F103, $(MCU)),) - # Cortex version - MCU = cortex-m3 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F1xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32F103x8 - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f1xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F103 - - USE_FPU ?= no - - # UF2 settings - UF2_FAMILY ?= STM32F1 -endif - -ifneq ($(findstring STM32F303, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F3xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32F303xC - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f3xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F303XC - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32F3 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFFD800 -endif - -ifneq ($(findstring STM32F401, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F4xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32F401xC - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f4xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F401XC - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32F4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 -endif - -ifneq ($(findstring STM32F405, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F4xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32F405xG - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f4xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F405XG - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32F4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 -endif - -ifneq ($(findstring STM32F407, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F4xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32F407xE - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f4xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F407XE - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32F4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 -endif - -ifneq ($(findstring STM32F411, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F4xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32F411xE - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f4xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F411XE - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32F4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 -endif - -ifneq ($(findstring STM32F446, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32F4xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32F446xE - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f4xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F446XE - - USE_FPU ?= yes - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 - - # Default as no chibios efl config - EEPROM_DRIVER ?= transient -endif - -ifneq ($(findstring STM32G431, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32G4xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32G431xB - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32g4xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_G431XB - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32G4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 - - # Default to transient driver as ChibiOS EFL is currently broken for single-bank G4xx devices - EEPROM_DRIVER ?= transient -endif - -ifneq ($(findstring STM32G474, $(MCU)),) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32G4xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32G474xE - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32g4xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_G474XE - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32G4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 -endif - -ifneq (,$(filter $(MCU),STM32L432 STM32L442)) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32L4xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32L432xC - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32l4xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_L432XC - - PLATFORM_NAME ?= platform_l432 - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32L4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 -endif - -ifneq (,$(filter $(MCU),STM32L433 STM32L443)) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32L4xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32L432xC - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32l4xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_L433XC - - PLATFORM_NAME ?= platform_l432 - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32L4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 -endif - -ifneq (,$(filter $(MCU),STM32L412 STM32L422)) - # Cortex version - MCU = cortex-m4 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32L4xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32L412xB - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32l4xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_L412XB - - PLATFORM_NAME ?= platform_l412_l422 - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32L4 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 -endif - -ifneq (,$(filter $(MCU),STM32H723 STM32H733)) - # Cortex version - MCU = cortex-m7 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = STM32 - MCU_SERIES = STM32H7xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32H723xG_ITCM64k - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32h7xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_H723XG - - PLATFORM_NAME ?= platform_type2 - - USE_FPU ?= yes - - # UF2 settings - UF2_FAMILY ?= STM32H7 - - # Bootloader address for STM32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FF09800 -endif - -ifneq ($(findstring WB32F3G71, $(MCU)),) - # Cortex version - MCU = cortex-m3 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = WB32 - MCU_SERIES = WB32F3G71xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= WB32F3G71x9 - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= wb32f3g71xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_WB32_F3G71XX - - USE_FPU ?= no - - # Bootloader address for WB32 DFU - WB32_BOOTLOADER_ADDRESS ?= 0x1FFFE000 -endif - -ifneq ($(findstring WB32FQ95, $(MCU)),) - # Cortex version - MCU = cortex-m3 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = WB32 - MCU_SERIES = WB32FQ95xx - - # Linker script to use - # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= WB32FQ95xB - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= wb32fq95xx - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_WB32_FQ95XX - - USE_FPU ?= no - - # Bootloader address for WB32 DFU - WB32_BOOTLOADER_ADDRESS ?= 0x1FFFE000 -endif - -ifneq ($(findstring GD32VF103, $(MCU)),) - # RISC-V - MCU = risc-v - - # RISC-V extensions and abi configuration - MCU_ARCH = rv32imac - MCU_ABI = ilp32 - MCU_CMODEL = medlow - - ## chip/board settings - # - the next two should match the directories in - # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) - # OR - # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_PORT_NAME = GD - MCU_FAMILY = GD32V - MCU_SERIES = GD32VF103 - - # Linker script to use - # - it should exist either in <chibios>/os/common/startup/RISCV-ECLIC/compilers/GCC/ld/ - # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= GD32VF103xB - - # Startup code to use - # - it should exist in <chibios>/os/common/startup/RISCV-ECLIC/compilers/GCC/mk/ - MCU_STARTUP ?= gd32vf103 - - # Board: it should exist either in <chibios>/os/hal/boards/, - # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= SIPEED_LONGAN_NANO - - USE_FPU ?= no -endif |