Fixed dead links (#2451)

* Fixed typo of 'confid.h' to 'config.h'

* Fixed broken links in docs

* Fixed a lot of dead links

43 files changed, 57 insertions, 62 deletions

diff --git a/docs/feature_mouse_keys.md b/docs/feature_mouse_keys.md
index 9e7df929ed..673eafaef5 100644
--- a/docs/feature_mouse_keys.md
+++ b/docs/feature_mouse_keys.md
@@ -40,7 +40,7 @@ You can use these keycodes within your keymap to map button presses to mouse act
 |`KC_MS_ACCEL1`  |`KC_ACL1`|Set mouse acceleration to 1|
 |`KC_MS_ACCEL2`  |`KC_ACL2`|Set mouse acceleration to 2|
 
-You can see an example in the `_ML` here: https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/keymaps/mouse_keys/keymap.c#L46
+You can see an example in the `_ML` here: https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/66/keymaps/mouse_keys/keymap.c#L46
 
 ## Configuring the Behavior of Mousekeys
 
diff --git a/docs/glossary.md b/docs/glossary.md
index c8c54d6ded..754c1469e3 100644
--- a/docs/glossary.md
+++ b/docs/glossary.md
@@ -4,7 +4,7 @@
 A line of 32-bit MCU's produced by a number of companies, such as Atmel, Cypress, Kinetis, NXP, ST, and TI.
 
 ## AVR
-A line of 8-bit MCU's produced by [Atmel](http://atmel.com). AVR was the original platform that TMK supported.
+A line of 8-bit MCU's produced by [Atmel](http://www.microchip.com/). AVR was the original platform that TMK supported.
 
 ## AZERTY
 The standard Français (French) keyboard layout. Named for the first 6 keys on the keyboard.
diff --git a/docs/understanding_qmk.md b/docs/understanding_qmk.md
index 13b6e2ef63..4544cb2602 100644
--- a/docs/understanding_qmk.md
+++ b/docs/understanding_qmk.md
@@ -77,7 +77,7 @@ At the keyboard level we define a C macro (typically named `KEYMAP()`) which map
 
 Notice how the second block of our `KEYMAP()` macro matches the Matrix Scanning array above? This macro is what will map the matrix scanning array to keycodes. However, if you look at a 17 key numpad you'll notice that it has 3 places where the matrix could have a switch but doesn't, due to larger keys. We have populated those spaces with `KC_NO` so that our keymap definition doesn't have to.
 
-You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/rev2/rev2.h). Explaining that is outside the scope of this document.
+You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/66/rev2/rev2.h). Explaining that is outside the scope of this document.
 
 ##### Keycode Assignment
 
@@ -135,8 +135,8 @@ The `process_record()` function itself is deceptively simple, but hidden within
 * [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/action.c#L128)
   * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/quantum.c#L140)
     * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/master/quantum/quantum.c#L143)
-    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/keyboards/cluecard/cluecard.c#L20)
-      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/keyboards/cluecard/keymaps/default/keymap.c#L58)
+    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/card/card.c#L20)
+      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
     * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_midi.c#L102)
     * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_audio.c#L10)
     * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_music.c#L69)
diff --git a/keyboards/crawlpad/readme.md b/keyboards/crawlpad/readme.md
index 98d04bfada..0bdc0f1722 100644
--- a/keyboards/crawlpad/readme.md
+++ b/keyboards/crawlpad/readme.md
@@ -14,4 +14,4 @@ Make example for this keyboard (after setting up your build environment):
 
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
 
-For those that prefer a GUI tool, the crawlpad.json file in this repo can be used on [kbfirmware.com](http://kbfirmware.com].
\ No newline at end of file
+For those that prefer a GUI tool, the crawlpad.json file in this repo can be used on [kbfirmware.com](http://kbfirmware.com).
\ No newline at end of file
diff --git a/keyboards/ergodox_ez/keymaps/bepo_tm_style/readme.md b/keyboards/ergodox_ez/keymaps/bepo_tm_style/readme.md
index d24e66c864..5571f120cc 100755
--- a/keyboards/ergodox_ez/keymaps/bepo_tm_style/readme.md
+++ b/keyboards/ergodox_ez/keymaps/bepo_tm_style/readme.md
@@ -19,4 +19,4 @@ make ergodox_ez:bepo_tm_style:all
 ## Debug
 
 See https://github.com/tmk/tmk_keyboard#magic-commands for command that can help
-debug, together with the hid_listen tool (https://docs.qmk.fm/faq_debug.html).
\ No newline at end of file
+debug, together with the [hid_listen tool](https://docs.qmk.fm/faq_debug.html).
\ No newline at end of file
diff --git a/keyboards/fc980c/README.md b/keyboards/fc980c/README.md
index 10d84a0961..16ad9021cd 100644
--- a/keyboards/fc980c/README.md
+++ b/keyboards/fc980c/README.md
@@ -155,8 +155,8 @@ Datasheets
 - AD5258: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5258.pdf
 - JST S5B-PH-SM4: http://www.jst-mfg.com/product/pdf/eng/ePH.pdf
 - Hirose UX60SC-MB-5S8: https://www.hirose.com/product/en/products/UX/UX60SC-MB-5S8%2880%29/
-- TYU TU1252WNR-05S: http://php2.twinner.com.tw/files/tyu/TU1252series.pdf
 - Tr(E42) for LED?: http://cj-elec.com/txUpfile/2013614923661845.pdf
+- TYU TU1252WNR-05S: http://php2.twinner.com.tw/files/goodjob/TY1252series.pdf
 
 
 3.3V power supply
diff --git a/keyboards/handwired/CMD60/README.md b/keyboards/handwired/CMD60/README.md
index 83e371543e..8b0dd109f6 100644
--- a/keyboards/handwired/CMD60/README.md
+++ b/keyboards/handwired/CMD60/README.md
@@ -10,7 +10,7 @@ achieve a higher level of productivity if you take the time to learn its functio
 
 ## Quantum MK Firmware
 
-For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+For the full Quantum feature list, see [the parent readme.md](/docs/README.md).
 
 ## Building
 
diff --git a/keyboards/handwired/fivethirteen/README.md b/keyboards/handwired/fivethirteen/README.md
index b2e13cd6dc..a965650fc6 100644
--- a/keyboards/handwired/fivethirteen/README.md
+++ b/keyboards/handwired/fivethirteen/README.md
@@ -3,7 +3,7 @@ fivethirteen keyboard firmware
 
 ## Quantum MK Firmware
 
-For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+For the full Quantum feature list, see [the parent readme.md](/doc/README.md).
 
 ## Building
 
diff --git a/keyboards/handwired/gamenum/README.md b/keyboards/handwired/gamenum/README.md
index 5b53004efd..bf8045be19 100644
--- a/keyboards/handwired/gamenum/README.md
+++ b/keyboards/handwired/gamenum/README.md
@@ -76,7 +76,7 @@ This is the code for the KC_FN1 button. Notice how we check against what key is
 
 ## Quantum MK Firmware
 
-For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+For the full Quantum feature list, see [the parent readme.md](/docs/README.md).
 
 ## Building
 
diff --git a/keyboards/handwired/minorca/readme.md b/keyboards/handwired/minorca/readme.md
index 93c767954d..0253506e09 100644
--- a/keyboards/handwired/minorca/readme.md
+++ b/keyboards/handwired/minorca/readme.md
@@ -30,4 +30,4 @@ Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` fol
 - [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck)
 - [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c)
 - [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck)
-- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid)
+- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck)
diff --git a/keyboards/handwired/reddot/readme.md b/keyboards/handwired/reddot/readme.md
index 11bcba54ad..8cdbb47d66 100755
--- a/keyboards/handwired/reddot/readme.md
+++ b/keyboards/handwired/reddot/readme.md
@@ -3,7 +3,7 @@
 
 ## Quantum MK Firmware
 
-For the full Quantum feature list, see [the parent README.md](/README.md).
+For the full Quantum feature list, see [the parent README.md](/readme.md).
 
 ## Building
 
diff --git a/keyboards/handwired/traveller/readme.md b/keyboards/handwired/traveller/readme.md
index 646844b1d7..0be53a9628 100644
--- a/keyboards/handwired/traveller/readme.md
+++ b/keyboards/handwired/traveller/readme.md
@@ -14,7 +14,7 @@ You can make your own traveller  keyboard by using the openscad tools from the a
 
 ## Quantum MK Firmware
 
-For the full Quantum feature list, see [the parent README.md](/README.md).
+For the full Quantum feature list, see [the parent README.md](/readme.md).
 
 ## Building
 
diff --git a/keyboards/jd40/readme.md b/keyboards/jd40/readme.md
index 6934e54d41..c5ab42ed05 100644
--- a/keyboards/jd40/readme.md
+++ b/keyboards/jd40/readme.md
@@ -5,7 +5,7 @@ A compact 40% keyboard.
 
 Keyboard Maintainer: QMK Community
 Hardware Supported: JD40 PCB
-Hardware Availability: [1up](https://1upkeyboards.com/jd40-mkii-1up-keyboards-logo-pcb.html) [mechanicalkeyboards.com](https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=2452) [originative](https://originative.co/products/jd40-pcb)
+Hardware Availability: [1up](https://1upkeyboards.com/jd40-mkii-1up-keyboards-logo-pcb.html) [mechanicalkeyboards.com](https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=2452) [originative](https://www.originativeco.com/products/jd40-pcb)
 
 Make example for this keyboard (after setting up your build environment):
 
diff --git a/keyboards/kinesis/alvicstep/readme.md b/keyboards/kinesis/alvicstep/readme.md
index 974e42e506..810a7aba16 100644
--- a/keyboards/kinesis/alvicstep/readme.md
+++ b/keyboards/kinesis/alvicstep/readme.md
@@ -23,7 +23,7 @@ Not yet implemented:
 
 ## Quantum MK Firmware
 
-For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+For the full Quantum feature list, see [the parent readme.md](/docs/README.md).
 
 ## Building
 
diff --git a/keyboards/kinesis/stapelberg/readme.md b/keyboards/kinesis/stapelberg/readme.md
index 1a408a15f8..0dcb7c283f 100644
--- a/keyboards/kinesis/stapelberg/readme.md
+++ b/keyboards/kinesis/stapelberg/readme.md
@@ -26,18 +26,18 @@ If you want to perform this customization, these parts may be helpful.
 | Reset cables                                           | 2        | Sparkfun | PRT-09140    |
 
 The board and connections are shown here
-![](images/controller_board.jpg)
+![controller board](https://i.imgur.com/2ZPMwvZ.jpg)
 
 The Teensy mounting detail can be seen here.
 I used a socket for prototyping.
-![](images/teensy_detail.jpg)
+![teensy detail](https://i.imgur.com/HrkGUjc.jpg)
 
 
 Since the proper mounting of the Teensy board places the reset button in a tight space, I added a 2-pin header to the reset and ground pins on the edge of the board.
 Shorting these two pins together will reset the board.
 I also put female to male header jumper cables on these so they could be accessed outside the enclosure.
 The exterior cables can be seen here.
-![](images/exterior_reset.jpg)
+![exterior reset](https://i.imgur.com/JNoxI40.jpg)
 
 
 ## Keymaps
@@ -52,7 +52,3 @@ To build with the default keymap, run `make default` while in the
 This keymap contains a dvorak implementation as well as media and symbol layers.
 
 Run `make dvorak` while in the `kinesis_stapelberg` working directory.
-
-![controller board](https://i.imgur.com/2ZPMwvZ.jpg)
-![exterior reset](https://i.imgur.com/JNoxI40.jpg)
-![teensy detail](https://i.imgur.com/HrkGUjc.jpg)
\ No newline at end of file
diff --git a/keyboards/kmac/readme.md b/keyboards/kmac/readme.md
index e7d97778f6..fccf902cab 100644
--- a/keyboards/kmac/readme.md
+++ b/keyboards/kmac/readme.md
@@ -33,7 +33,7 @@ A [keymap](keymaps/winkeyless) for the winkeyless version of the PCB are also pr
 
 ### Custom keymaps
 
-To define your own keymap, copy one of the [existing keymap](keymaps) folders and give it the name of your keymap. Then check the [keymap documentation](https://docs.qmk.fm/Keymap.html) for details on how to modify the keymap.
+To define your own keymap, copy one of the [existing keymap](keymaps) folders and give it the name of your keymap. Then check the [keymap documentation](https://docs.qmk.fm/faq_keymap.html) for details on how to modify the keymap.
 
 To make it easy to define keymaps for the different versions of the PCB two macros are provided.
 
diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md
index 155f69f156..80fe08b93c 100644
--- a/keyboards/lets_split/readme.md
+++ b/keyboards/lets_split/readme.md
@@ -44,7 +44,7 @@ If everything worked correctly you will see a file:
 lets_split_rev2_YOUR_KEYMAP_NAME.hex
 ```
 
-For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md.
+For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md.
 
 ### Let's split 1.0
 If you have a first generation Let's Split you will need to use the revision 1 code. To do so, use `rev1` in all your commands instead.
diff --git a/keyboards/lfkeyboards/lfkpad/readme.md b/keyboards/lfkeyboards/lfkpad/readme.md
index 5f23d988a0..7dd8337e8a 100644
--- a/keyboards/lfkeyboards/lfkpad/readme.md
+++ b/keyboards/lfkeyboards/lfkpad/readme.md
@@ -3,7 +3,7 @@ bluepad keyboard firmware
 
 ## Quantum MK Firmware
 
-For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+For the full Quantum feature list, see [the parent readme.md](/docs/README.md).
 
 ## Building
 
diff --git a/keyboards/mitosis/readme.md b/keyboards/mitosis/readme.md
index 3cbdbae61a..0d5a74a1dc 100644
--- a/keyboards/mitosis/readme.md
+++ b/keyboards/mitosis/readme.md
@@ -3,7 +3,7 @@ Mitosis
 
 A wireless split compact keyboard.
 
-Keyboard Maintainer: [@reversebias](https://github.com/reversebias]
+Keyboard Maintainer: [@reversebias](https://github.com/reversebias)
 Hardware Supported: Mitosis PCB
 Hardware Availability: https://www.reddit.com/r/MechanicalKeyboards/comments/66588f/wireless_split_qmk_mitosis/
 
diff --git a/keyboards/nyquist/keymaps/333fred/README.md b/keyboards/nyquist/keymaps/333fred/README.md
index aa783af07f..fa354bb4d3 100644
--- a/keyboards/nyquist/keymaps/333fred/README.md
+++ b/keyboards/nyquist/keymaps/333fred/README.md
@@ -1,6 +1,6 @@
 # 333fred's Nyquist Layout
 
-This nyquist layout is based on my Ergodox Infinity Layout, which is [here](../../../ergodox/keymaps/333fred/README.md). It doesn't have all of my VS extensions, as I have my nyquist at home, not at work.
+This nyquist layout is based on my Ergodox Infinity Layout, which is [here](../../../../layouts/community/ergodox/333fred/README.md). It doesn't have all of my VS extensions, as I have my nyquist at home, not at work.
 
 ## Layers
 
diff --git a/keyboards/planck/keymaps/grahampheath/readme.md b/keyboards/planck/keymaps/grahampheath/readme.md
index ec8020f18c..507120c6f1 100644
--- a/keyboards/planck/keymaps/grahampheath/readme.md
+++ b/keyboards/planck/keymaps/grahampheath/readme.md
@@ -1,4 +1,4 @@
 # Graham's Planck
 
 ## Sounds
-I've added a [8ohm 0.5W speaker](http://a.co/6MIKZSy), its a bit large, but it fits in approximately the same space as the ProMicro. I soldered to the pcb hole labeled PC6 on my Rev 3 Planck PCB, and GND on the near by chip. [Pic of an identical mod][https://i1.sndcdn.com/artworks-000128070066-myh0ls-t500x500.jpg] (not mine).
+I've added a [8ohm 0.5W speaker](http://a.co/6MIKZSy), its a bit large, but it fits in approximately the same space as the ProMicro. I soldered to the pcb hole labeled PC6 on my Rev 3 Planck PCB, and GND on the near by chip. [Pic of an identical mod](https://i1.sndcdn.com/artworks-000128070066-myh0ls-t500x500.jpg) (not mine).
diff --git a/keyboards/readme.md b/keyboards/readme.md
index 35900f611f..5ba98c6c45 100644
--- a/keyboards/readme.md
+++ b/keyboards/readme.md
@@ -53,7 +53,7 @@ These keyboards are part of the QMK repository, but their manufacturers are not
 * [Lets Split](/keyboards/lets_split) - Split ortholinear 40% keyboard.
 * [Phantom](/keyboards/phantom) &mdash; A tenkeyless kit by Teel, also from Geekhack.
 * [Retro Refit](/keyboards/retro_refit) &mdash; Another creation by IBNobody.
-* [S60-x](/keyboards/s60-x) &mdash; DIY compact keyboard designed by VinnyCordeiro for Sentraq.
+* [S60-x](/keyboards/s60_x) &mdash; DIY compact keyboard designed by VinnyCordeiro for Sentraq.
 * [Satan](/keyboards/satan) &mdash; A GH60 variant.
 * [SixKeyBoard](/keyboards/sixkeyboard) &mdash; A 6-key keyboard made by TechKeys.
 * [TheVan 44](/keyboards/tv44) &mdash; A 44-key staggered keybard by Evangs.
diff --git a/keyboards/roadkit/readme.md b/keyboards/roadkit/readme.md
index fbc40a50fd..245d5242ae 100644
--- a/keyboards/roadkit/readme.md
+++ b/keyboards/roadkit/readme.md
@@ -5,7 +5,7 @@ A programmable macro pad.
 
 Keyboard Maintainer: QMK Community
 Hardware Supported: Roadkit PCB
-Hardware Availability: https://thevankeyboards.com/products/roadkit-r2?variant=37353813966
+Hardware Availability: https://thevankeyboards.com/collections/catalog/products/road-kit-diy?variant=603645345806
 
 Make example for this keyboard (after setting up your build environment):
 
diff --git a/keyboards/s60_x/keymaps/custom/readme.md b/keyboards/s60_x/keymaps/custom/readme.md
index cf87bd915f..fd79d53607 100644
--- a/keyboards/s60_x/keymaps/custom/readme.md
+++ b/keyboards/s60_x/keymaps/custom/readme.md
@@ -1,5 +1,5 @@
 ### 8  Custom
-The custom keymap - [keymap_custom.c](keymap_custom.c) - is where I tested all the switches, not being concerned with a specific layout or layers. It's a plain layout option with the extra keys used on ISO & HHKB layouts being assigned some other keys.
+The custom keymap - [keymap.c](keymap.c) - is where I tested all the switches, not being concerned with a specific layout or layers. It's a plain layout option with the extra keys used on ISO & HHKB layouts being assigned some other keys.
 
 #### 8.0 Default layer
     ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
diff --git a/keyboards/s60_x/keymaps/hasu/readme.md b/keyboards/s60_x/keymaps/hasu/readme.md
index 64969b616d..b79d0e97a5 100644
--- a/keyboards/s60_x/keymaps/hasu/readme.md
+++ b/keyboards/s60_x/keymaps/hasu/readme.md
@@ -1,4 +1,4 @@
 ### 5. Hasu
-This is Hasu's favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. See [keymap_hasu.c](keymap_hasu.c) for detail.
+This is Hasu's favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. See [keymap.c](keymap.c) for detail.
 
 (Hasu is the initial creator of the TMK firmware, in case you weren't aware.)
\ No newline at end of file
diff --git a/keyboards/s60_x/keymaps/hhkb/readme.md b/keyboards/s60_x/keymaps/hhkb/readme.md
index 2bceb26dd5..c7dcec899f 100644
--- a/keyboards/s60_x/keymaps/hhkb/readme.md
+++ b/keyboards/s60_x/keymaps/hhkb/readme.md
@@ -1,5 +1,5 @@
 ### 7. HHKB
-[keymap_hhkb.c](keymap_hhkb.c) emulates original HHKB layers.
+[keymap.c](keymap.c) emulates original HHKB layers.
 #### 7.0: Default layer
     ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
     │ Esc │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │  \  │  `  │
diff --git a/keyboards/s60_x/keymaps/plain/readme.md b/keyboards/s60_x/keymaps/plain/readme.md
index ab13323e3b..02f524495e 100644
--- a/keyboards/s60_x/keymaps/plain/readme.md
+++ b/keyboards/s60_x/keymaps/plain/readme.md
@@ -1,6 +1,6 @@
 ### 4. Plain
 Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host.
-See [keymap_plain.c](keymap_plain.c) for detail.
+See [keymap.c](keymap.c) for detail.
 
 #### 4.0 Plain Default layer
     ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
diff --git a/keyboards/s60_x/keymaps/poker/readme.md b/keyboards/s60_x/keymaps/poker/readme.md
index 0d8be9d0f8..04d2b78bef 100644
--- a/keyboards/s60_x/keymaps/poker/readme.md
+++ b/keyboards/s60_x/keymaps/poker/readme.md
@@ -1,6 +1,6 @@
 ### 3  Poker
-[keymap_poker.c](keymap_poker.c) emulates original Poker layers
-while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
+[keymap_poker](../poker/readme.md) emulates original Poker layers
+while both [keymap_poker_bit](../poker_bit/readme.md) and [keymap_poker_set](../poker_set/readme.md) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
 
     Fn + Esc = `
     Fn + {left, down, up, right}  = {home, pgdown, pgup, end}
diff --git a/keyboards/s60_x/keymaps/poker_bit/readme.md b/keyboards/s60_x/keymaps/poker_bit/readme.md
index 0d8be9d0f8..04d2b78bef 100644
--- a/keyboards/s60_x/keymaps/poker_bit/readme.md
+++ b/keyboards/s60_x/keymaps/poker_bit/readme.md
@@ -1,6 +1,6 @@
 ### 3  Poker
-[keymap_poker.c](keymap_poker.c) emulates original Poker layers
-while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
+[keymap_poker](../poker/readme.md) emulates original Poker layers
+while both [keymap_poker_bit](../poker_bit/readme.md) and [keymap_poker_set](../poker_set/readme.md) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
 
     Fn + Esc = `
     Fn + {left, down, up, right}  = {home, pgdown, pgup, end}
diff --git a/keyboards/s60_x/keymaps/poker_set/readme.md b/keyboards/s60_x/keymaps/poker_set/readme.md
index 0d8be9d0f8..04d2b78bef 100644
--- a/keyboards/s60_x/keymaps/poker_set/readme.md
+++ b/keyboards/s60_x/keymaps/poker_set/readme.md
@@ -1,6 +1,6 @@
 ### 3  Poker
-[keymap_poker.c](keymap_poker.c) emulates original Poker layers
-while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
+[keymap_poker](../poker/readme.md) emulates original Poker layers
+while both [keymap_poker_bit](../poker_bit/readme.md) and [keymap_poker_set](../poker_set/readme.md) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
 
     Fn + Esc = `
     Fn + {left, down, up, right}  = {home, pgdown, pgup, end}
diff --git a/keyboards/s60_x/keymaps/spacefn/readme.md b/keyboards/s60_x/keymaps/spacefn/readme.md
index d04bd94865..fd657f6526 100644
--- a/keyboards/s60_x/keymaps/spacefn/readme.md
+++ b/keyboards/s60_x/keymaps/spacefn/readme.md
@@ -1,5 +1,5 @@
 ### 6. SpaceFN
-This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. See [keymap_spacefn.c](keymap_spacefn.c) and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0).
+This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. See [keymap.c](keymap.c) and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0).
 
 #### 6.0 Default layer
     ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
diff --git a/keyboards/tada68/readme.md b/keyboards/tada68/readme.md
index a18758ac94..d1c72cfa95 100755
--- a/keyboards/tada68/readme.md
+++ b/keyboards/tada68/readme.md
@@ -5,7 +5,7 @@ A compact 65% keyboard.
 
 Keyboard Maintainer: QMK Community
 Hardware Supported: TADA68 PCB
-Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/products/tada68-mechanical-keyboard-gateron-swtich-65-layout-dye-sub-keycaps-cherry-profils?variant=34710238797) [kbdist](http://www.kbdist.com/shop/saber-68)
+Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/products/tada68-mechanical-keyboard-gateron-swtich-65-layout-dye-sub-keycaps-cherry-profils?variant=34710238797) [kbdist](http://www.kbdist.com/)
 
 Make example for this keyboard (after setting up your build environment):
 
diff --git a/keyboards/tv44/readme.md b/keyboards/tv44/readme.md
index c2394c0313..f23ca0da52 100644
--- a/keyboards/tv44/readme.md
+++ b/keyboards/tv44/readme.md
@@ -5,7 +5,7 @@ A compact 44% keyboard.
 
 Keyboard Maintainer: QMK Community
 Hardware Supported: The Van PCB
-Hardware Availability: https://thevankeyboards.com/products/minivan-r4-keyboard-kit?variant=37353952718
+Hardware Availability: https://thevankeyboards.com/collections/catalog/products/minivan-diy?variant=609138376718
 
 Make example for this keyboard (after setting up your build environment):
 
diff --git a/layouts/community/ergodox/ab/readme.md b/layouts/community/ergodox/ab/readme.md
index fde1c1726a..22a7922d97 100644
--- a/layouts/community/ergodox/ab/readme.md
+++ b/layouts/community/ergodox/ab/readme.md
@@ -8,7 +8,7 @@ Beginner's keymap emulates standard QWERTY keyboard for beginners. Once you get
 * Easy on beginners. It has everything you need for your day to day usage.
 
 #### Cons
-* Keys are not ergonomically placed to take full advantage of Ergodox-EZ. Take a look at this [Default Keymap](https://github.com/qmk/qmk_firmware/blob/master/keyboards/ergodox/keymaps/default/readme.md)
+* Keys are not ergonomically placed to take full advantage of Ergodox-EZ. Take a look at this [Default Keymap](https://github.com/qmk/qmk_firmware/blob/master/layouts/default/ergodox/default_ergodox/keymap.c)
 * While multiple layers are possible, beginner's keymap only uses one additional layer for mouse, function and volume keys.
 
 #### Notes
diff --git a/layouts/community/ergodox/belak/README.md b/layouts/community/ergodox/belak/README.md
index 30484e6e20..e251dc099a 100644
--- a/layouts/community/ergodox/belak/README.md
+++ b/layouts/community/ergodox/belak/README.md
@@ -1,8 +1,8 @@
 # Belak's Ergodox Layout
 
-This has been based off of [emacs\_osx\_dk](https://github.com/jackhumbert/qmk_firmware/tree/master/keyboards/ergodox/keymaps/emacs_osx_dk)
+This has been based off of [emacs\_osx\_dk](https://github.com/qmk/qmk_firmware/tree/master/layouts/community/ergodox/emacs_osx_dk)
 from the main qmk repo. However, I've taken some of the ideas for the thumbs
-from [dvorak\_emacs](https://github.com/jackhumbert/qmk_firmware/tree/master/keyboards/ergodox/keymaps/dvorak_emacs)
+from [dvorak\_emacs](https://github.com/qmk/qmk_firmware/tree/master/layouts/community/ergodox/dvorak_emacs)
 and tweaked it a bit based on the keycaps I have.
 
 This keyboard is intended for use in emacs (one of the main reasons for easy
diff --git a/layouts/community/ergodox/familiar/README.md b/layouts/community/ergodox/familiar/README.md
index 536179337f..8d68af21a3 100644
--- a/layouts/community/ergodox/familiar/README.md
+++ b/layouts/community/ergodox/familiar/README.md
@@ -1,7 +1,7 @@
 # ErgoDox Familiar Layout
 Familiar layout for those who regularly switch back and forth from ErgoDox to "normal" QWERTY.
 
-[![License: GPL v3](https://img.shields.io/badge/License-GPL%20v3-blue.svg)](../../../../license_GPLv3.md../../../../license_GPLv3.md) [![standard-readme compliant](https://img.shields.io/badge/readme%20style-standard-brightgreen.svg)](https://github.com/RichardLitt/standard-readme)
+[![License: GPL v3](https://img.shields.io/badge/License-GPL%20v3-blue.svg)](../../../../license_GPLv3.md) [![standard-readme compliant](https://img.shields.io/badge/readme%20style-standard-brightgreen.svg)](https://github.com/RichardLitt/standard-readme)
 
 ## Table of Contents
 
@@ -66,4 +66,4 @@ I'm terrible at this; I have no background in human-computer interaction, kinesi
 1. `MENU` and `LEAD` are useless, at the moment.
 
 ## License
-QMK is licensed ([mostly](https://github.com/qmk/qmk_firmware/issues/1038)) under the [GPLv2](blob/master/license_GPLv2.md). Accordingly, to whatever extent applicable, this keymap is licensed under the [GPLv3](../../../../license_GPLv3.md).
+QMK is licensed ([mostly](https://github.com/qmk/qmk_firmware/issues/1038)) under the [GPLv2](../../../../license_GPLv2.md). Accordingly, to whatever extent applicable, this keymap is licensed under the [GPLv3](../../../../license_GPLv3.md).
diff --git a/layouts/community/ergodox/ordinary/readme.md b/layouts/community/ergodox/ordinary/readme.md
index 2e8d86960f..53cba0450e 100644
--- a/layouts/community/ergodox/ordinary/readme.md
+++ b/layouts/community/ergodox/ordinary/readme.md
@@ -98,4 +98,4 @@ No rights reserved. This software is in the public domain. Credit me if you are
 Keyboard layout images were created with http://www.keyboard-layout-editor.com/ by Ian Prest my thanks to that free service
 
 Details: readme.md
-         https://github.com/nrrkeene/qmk_firmware/tree/master/keyboards/ergodox/keymaps/ordinary
+         https://github.com/nrrkeene/qmk_firmware/tree/master/layouts/community/ergodox/ordinary
diff --git a/layouts/community/ergodox/supercoder/readme.md b/layouts/community/ergodox/supercoder/readme.md
index 7f2c9ef695..e82ec59709 100644
--- a/layouts/community/ergodox/supercoder/readme.md
+++ b/layouts/community/ergodox/supercoder/readme.md
@@ -15,8 +15,7 @@ Behold the Ultimate SuperCoder 2000 layout!
 
 ### To use it...
 
-To use this piece of top quality engineering, you can either
-[download the hex file][hex] we have prepared for you, or you can compile it on
+To use this piece of top quality engineering, you must compile it on
 your own:
 
  [hex]: https://raw.githubusercontent.com/algernon/ergodox-supercoder/master/supercoder.hex
diff --git a/layouts/community/ergodox/tm2030/readme.md b/layouts/community/ergodox/tm2030/readme.md
index 6cd794726d..23746ddb76 100644
--- a/layouts/community/ergodox/tm2030/readme.md
+++ b/layouts/community/ergodox/tm2030/readme.md
@@ -9,7 +9,7 @@ Most of the TM2030 features are supported except
 * show desktop key (at the right of the space key)
 * 102/106 modes
 
-Dvorak mode is even supported by pressing [`Magic`](/TMK_readme.md#magic-commands)+`1` (`Magic` is by default `LShift`+`RShift`)
+Dvorak mode is even supported by pressing [`Magic`](/docs/feature_bootmagic.md)+`1` (`Magic` is by default `LShift`+`RShift`)
 
 Some keys had to be moved around to fit into the ErgoDox, especially the `F1`-`F12` keys and the arrow keys.
 
diff --git a/layouts/community/ergodox/townk_osx/readme.md b/layouts/community/ergodox/townk_osx/readme.md
index a2dcd35fa4..e10e447829 100644
--- a/layouts/community/ergodox/townk_osx/readme.md
+++ b/layouts/community/ergodox/townk_osx/readme.md
@@ -1,7 +1,7 @@
 # Townk's Keymap
 
 Trying to take care of an enjury on my arm I borrow an ergonomic keyboard from
-a frient ([Kinesis Advantage](http://www.kinesis-ergo.com/shop/advantage-pro-for-pc-mac/)).
+a frient ([Kinesis Advantage](https://www.kinesis-ergo.com/shop/advantage2/)).
 
 I really enjoyed my time with it but there were some anoyancies:
 
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/README.md b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/README.md
index 49cd83e0af..1eecb78ef2 100644
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/README.md
+++ b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/README.md
@@ -10,7 +10,7 @@ Project main web site is: <http://www.circuitsathome.com>.
 
 Some information can also be found at: <http://blog.tkjelectronics.dk/>.
 
-The shield can be purchased at the main site: <http://www.circuitsathome.com/products-page/arduino-shields> or from [TKJ Electronics](http://tkjelectronics.com/): <http://shop.tkjelectronics.dk/product_info.php?products_id=43>.
+The shield can be purchased at the main site: <https://www.circuitsathome.com/arduino_usb_host_shield_projects/> or from [TKJ Electronics](http://tkjelectronics.com/): <http://shop.tkjelectronics.dk/product_info.php?products_id=43>.
 
 ![USB Host Shield](http://shop.tkjelectronics.dk/images/USB_Host_Shield1.jpg)
 
@@ -196,7 +196,7 @@ Also take a look at the blog posts:
 
 A special thanks go to the following people:
 
-1. _Richard Ibbotson_ who made this excellent guide: <http://www.circuitsathome.com/mcu/ps3-and-wiimote-game-controllers-on-the-arduino-host-shield-part>
+1. _Richard Ibbotson_ who made this excellent guide: <https://www.circuitsathome.com/mcu/ps3-and-wiimote-game-controllers-on-the-arduino-host-shield-part-1/>
 2. _Tomoyuki Tanaka_ for releasing his code for the Arduino USB Host shield connected to the wiimote: <http://www.circuitsathome.com/mcu/rc-car-controlled-by-wii-remote-on-arduino>
 
 Also a big thanks all the people behind these sites about the Motion controller:
@@ -216,10 +216,10 @@ The [XBOXOLD](XBOXOLD.cpp) class implements support for the original Xbox contro
 
 All the information are from the following sites:
 
-* <https://github.com/torvalds/linux/blob/master/Documentation/input/xpad.txt>
+* <https://github.com/torvalds/linux/blob/master/Documentation/input/devices/xpad.rst>
 * <https://github.com/torvalds/linux/blob/master/drivers/input/joystick/xpad.c>
 * <http://euc.jp/periphs/xbox-controller.ja.html>
-* <https://github.com/Grumbel/xboxdrv/blob/master/PROTOCOL#L15>
+* <https://github.com/Grumbel/xboxdrv/blob/stable/PROTOCOL#L15>
 
 #### Xbox 360 Library
 
@@ -241,7 +241,7 @@ All the information regarding the Xbox 360 controller protocol are form these si
 
 * <http://tattiebogle.net/index.php/ProjectRoot/Xbox360Controller/UsbInfo>
 * <http://tattiebogle.net/index.php/ProjectRoot/Xbox360Controller/WirelessUsbInfo>
-* <https://github.com/Grumbel/xboxdrv/blob/master/PROTOCOL>
+* <https://github.com/Grumbel/xboxdrv/blob/stable/PROTOCOL>
 
 #### Xbox ONE Library
 
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/testusbhostFAT/README.md b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/testusbhostFAT/README.md
index d8b4296b1a..0f2a734a65 100644
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/testusbhostFAT/README.md
+++ b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/testusbhostFAT/README.md
@@ -10,7 +10,7 @@ To compile this example you will need the following libraries as well:
 * [generic_storage FATfs](https://github.com/xxxajk/generic_storage)
 * [RTClib](https://github.com/xxxajk/RTClib)
 
-The following shield is recommended for larger projects: <http://ruggedcircuits.com/html/quadram.html>.
+The following shield is recommended for larger projects: <https://www.rugged-circuits.com/new-products/quadram>.
 
 You may use the bundled [Makefile](Makefile) to compile the code instead of the Arduino IDE if you have problems or want a smaller binary. The master makefile is bundled as a submodule, but can also be downloaded manually at the following link: <https://github.com/xxxajk/Arduino_Makefile_master>.
 
diff --git a/tmk_core/readme.md b/tmk_core/readme.md
index 5f135617c4..a3783fe37b 100644
--- a/tmk_core/readme.md
+++ b/tmk_core/readme.md
@@ -2,7 +2,7 @@ TMK Keyboard Firmware Core Library
 ==================================
 This is a keyboard firmware library with some useful features for Atmel AVR and Cortex-M.
 
-Source code is available here: <https://github.com/tmk/tmk_keyboard/tree/core>
+Source code is available here: <https://github.com/tmk/tmk_keyboard/tree/master/tmk_core>
 
 
 Updates
@@ -54,7 +54,7 @@ LUFA, PJRC and V-USB stack have their own license respectively.
 
 Build Firmware and Program Controller
 -------------------------------------
-See [doc/build.md](doc/build.md).
+See [doc/build.md](https://github.com/tmk/tmk_keyboard/blob/master/tmk_core/doc/build.md).