diff options
| author | Joel Challis <git@zvecr.com> | 2024-09-02 03:48:17 +0100 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2024-09-02 03:48:17 +0100 |
| commit | 3bd303f204a59ed950934f5da4c299a8be33b363 (patch) | |
| tree | 17ff660931b925909be4a75fba55bd67441bf2bb /docs/drivers | |
| parent | 096aca63c5d7789669d90ef5f128189be85b7a35 (diff) | |
Remove `arm_atsam` platform (#24337)
Diffstat (limited to 'docs/drivers')
| -rw-r--r-- | docs/drivers/gpio.md | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/docs/drivers/gpio.md b/docs/drivers/gpio.md index 9ce4f2aa20..b21a17bc39 100644 --- a/docs/drivers/gpio.md +++ b/docs/drivers/gpio.md | |||
| @@ -13,7 +13,7 @@ The following macros provide basic control of GPIOs and are found in `platforms/ | |||
| 13 | |`gpio_set_pin_input_low(pin)` |Set pin as input with builtin pull-down resistor (unavailable on AVR)| | 13 | |`gpio_set_pin_input_low(pin)` |Set pin as input with builtin pull-down resistor (unavailable on AVR)| |
| 14 | |`gpio_set_pin_output(pin)` |Set pin as output (alias of `gpio_set_pin_output_push_pull`) | | 14 | |`gpio_set_pin_output(pin)` |Set pin as output (alias of `gpio_set_pin_output_push_pull`) | |
| 15 | |`gpio_set_pin_output_push_pull(pin)` |Set pin as output, push/pull mode | | 15 | |`gpio_set_pin_output_push_pull(pin)` |Set pin as output, push/pull mode | |
| 16 | |`gpio_set_pin_output_open_drain(pin)`|Set pin as output, open-drain mode (unavailable on AVR and ATSAM) | | 16 | |`gpio_set_pin_output_open_drain(pin)`|Set pin as output, open-drain mode (unavailable on AVR) | |
| 17 | |`gpio_write_pin_high(pin)` |Set pin level as high, assuming it is an output | | 17 | |`gpio_write_pin_high(pin)` |Set pin level as high, assuming it is an output | |
| 18 | |`gpio_write_pin_low(pin)` |Set pin level as low, assuming it is an output | | 18 | |`gpio_write_pin_low(pin)` |Set pin level as low, assuming it is an output | |
| 19 | |`gpio_write_pin(pin, level)` |Set pin level, assuming it is an output | | 19 | |`gpio_write_pin(pin, level)` |Set pin level, assuming it is an output | |