Update GPIO macro usages in core (#23093)

1 files changed, 10 insertions, 10 deletions

diff --git a/drivers/painter/comms/qp_comms_spi.c b/drivers/painter/comms/qp_comms_spi.c
index 9f52bc7d1f..4e6067394b 100644
--- a/drivers/painter/comms/qp_comms_spi.c
+++ b/drivers/painter/comms/qp_comms_spi.c
@@ -17,8 +17,8 @@ bool qp_comms_spi_init(painter_device_t device) {
     spi_init();
 
     // Set up CS as output high
-    setPinOutput(comms_config->chip_select_pin);
-    writePinHigh(comms_config->chip_select_pin);
+    gpio_set_pin_output(comms_config->chip_select_pin);
+    gpio_write_pin_high(comms_config->chip_select_pin);
 
     return true;
 }
@@ -49,7 +49,7 @@ void qp_comms_spi_stop(painter_device_t device) {
     painter_driver_t *     driver       = (painter_driver_t *)device;
     qp_comms_spi_config_t *comms_config = (qp_comms_spi_config_t *)driver->comms_config;
     spi_stop();
-    writePinHigh(comms_config->chip_select_pin);
+    gpio_write_pin_high(comms_config->chip_select_pin);
 }
 
 const painter_comms_vtable_t spi_comms_vtable = {
@@ -74,16 +74,16 @@ bool qp_comms_spi_dc_reset_init(painter_device_t device) {
 
     // Set up D/C as output low, if specified
     if (comms_config->dc_pin != NO_PIN) {
-        setPinOutput(comms_config->dc_pin);
-        writePinLow(comms_config->dc_pin);
+        gpio_set_pin_output(comms_config->dc_pin);
+        gpio_write_pin_low(comms_config->dc_pin);
     }
 
     // Set up RST as output, if specified, performing a reset in the process
     if (comms_config->reset_pin != NO_PIN) {
-        setPinOutput(comms_config->reset_pin);
-        writePinLow(comms_config->reset_pin);
+        gpio_set_pin_output(comms_config->reset_pin);
+        gpio_write_pin_low(comms_config->reset_pin);
         wait_ms(20);
-        writePinHigh(comms_config->reset_pin);
+        gpio_write_pin_high(comms_config->reset_pin);
         wait_ms(20);
     }
 
@@ -93,14 +93,14 @@ bool qp_comms_spi_dc_reset_init(painter_device_t device) {
 uint32_t qp_comms_spi_dc_reset_send_data(painter_device_t device, const void *data, uint32_t byte_count) {
     painter_driver_t *              driver       = (painter_driver_t *)device;
     qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config;
-    writePinHigh(comms_config->dc_pin);
+    gpio_write_pin_high(comms_config->dc_pin);
     return qp_comms_spi_send_data(device, data, byte_count);
 }
 
 void qp_comms_spi_dc_reset_send_command(painter_device_t device, uint8_t cmd) {
     painter_driver_t *              driver       = (painter_driver_t *)device;
     qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config;
-    writePinLow(comms_config->dc_pin);
+    gpio_write_pin_low(comms_config->dc_pin);
     spi_write(cmd);
 }