Format code according to conventions (#16322)

1 files changed, 7 insertions, 7 deletions

diff --git a/drivers/usb2422.c b/drivers/usb2422.c
index 62b919093b..8ee54b24ee 100644
--- a/drivers/usb2422.c
+++ b/drivers/usb2422.c
@@ -352,7 +352,7 @@ void USB2422_init() {
     setPinInput(USB2422_ACTIVE_PIN);
 #endif
 
-    i2c_init();  // IC2 clk must be high at USB2422 reset release time to signal SMB configuration
+    i2c_init(); // IC2 clk must be high at USB2422 reset release time to signal SMB configuration
 }
 
 void USB2422_configure() {
@@ -363,14 +363,14 @@ void USB2422_configure() {
     // configure Usb2422 registers
     config.VID.reg               = USB2422_VENDOR_ID;
     config.PID.reg               = USB2422_PRODUCT_ID;
-    config.DID.reg               = USB2422_DEVICE_VER;  // BCD format, eg 01.01
-    config.CFG1.bit.SELF_BUS_PWR = 1;                   // self powered for now
-    config.CFG1.bit.HS_DISABLE   = 1;                   // full or high speed
+    config.DID.reg               = USB2422_DEVICE_VER; // BCD format, eg 01.01
+    config.CFG1.bit.SELF_BUS_PWR = 1;                  // self powered for now
+    config.CFG1.bit.HS_DISABLE   = 1;                  // full or high speed
     // config.CFG2.bit.COMPOUND = 0; // compound device
-    config.CFG3.bit.STRING_EN = 1;  // strings enabled
+    config.CFG3.bit.STRING_EN = 1; // strings enabled
     // config.NRD.bit.PORT2_NR = 0; // MCU is non-removable
-    config.MAXPB.reg = 20;  // 0mA
-    config.HCMCB.reg = 20;  // 0mA
+    config.MAXPB.reg = 20; // 0mA
+    config.HCMCB.reg = 20; // 0mA
     config.MFRSL.reg = sizeof(USB2422_MANUFACTURER);
     config.PRDSL.reg = sizeof(USB2422_PRODUCT);
     config.SERSL.reg = sizeof(SERNAME);