prepare for uart commands

This commit is contained in:
Vineet K 2024-04-21 15:22:20 -04:00 committed by Shokara Kou
parent c2fe984ed4
commit d129c76966

60
notes.c
View File

@ -41,6 +41,9 @@ unsigned short freqs[] = {
[255] = 0 // used as a 'silent' note
};
unsigned char note = 0;
// 0 = buttons write note+cycles+\xff to UART
// 1 = buttons don't do anything, speaker reads note+cycles+\xff from UART
unsigned char mode = 0;
ISR (PCINT0_vect)
{
@ -121,33 +124,60 @@ main(void)
// Sends Square wave to the Speaker When a Button is Pressed
unsigned short cycles = 0;
unsigned char last_note = 0;
for (unsigned char n = 0;; n = (n + 1) % 2) {
unsigned char tmp = 0;
for (;;) {
// check if any buttons are pressed, otherwise don't play a note
if (((PINB & PCMSK0) | (PINC & PCMSK1) | (PIND & PCMSK2)) == 0) {
// if a button was released, then send note and cycles played
if (cycles > 0) {
usart_send(last_note);
usart_send(tmp);
usart_send(HIGH(cycles));
usart_send(LOW(cycles));
usart_send('\xff');
usart_send(0xff);
cycles = 0;
} else {
if (UCSR0A & (1 << RXC0)) {
mode = UDR0;
usart_send(mode);
}
}
continue;
}
// Prepare Timer/Counter
TCNT1 = 1;
last_note = note;
OCR1A = freqs[note];
TCCR1B |= 1 << CS11;
if (mode == 0) {
// Prepare Timer/Counter
TCNT1 = 1;
tmp = note;
OCR1A = freqs[note];
TCCR1B |= 1 << CS11;
while ((TIFR1 & (1 << OCF1A)) == 0); // Monitor OutPut Compare Flag
// Monitor OutPut Compare Flag
while ((TIFR1 & (1 << OCF1A)) == 0);
// Toggles port For Speaker
PORTD ^= 1 << P_SPKR;
TIFR1 |= 1 << OCF1A;
TCCR1B &= ~(1 << CS11);
cycles = (cycles + 1) % 0xffff;
// Toggles port For Speaker
PORTD ^= 1 << P_SPKR;
TIFR1 |= 1 << OCF1A;
TCCR1B &= ~(1 << CS11);
cycles = (cycles + 1) % 0xffff;
} else if (mode == 0xb0) {
note = usart_read();
tmp = usart_read();
cycles = tmp << 8;
tmp = usart_read();
cycles |= tmp;
(void)usart_read();
for (unsigned char i = 0; i < cycles; i++) {
TCNT1 = 1;
OCR1A = freqs[note];
TCCR1B |= 1 << CS11;
while ((TIFR1 & (1 << OCF1A)) == 0);
PORTD ^= 1 << P_SPKR;
TIFR1 |= 1 << OCF1A;
TCCR1B &= ~(1 << CS11);
}
}
}
}