remove more unused libraries

1 files changed, 0 insertions, 276 deletions

diff --git a/lib/usbhost/USB_Host_Shield_2.0/XBOXRECV.h b/lib/usbhost/USB_Host_Shield_2.0/XBOXRECV.h
deleted file mode 100644
index 4f9214653c..0000000000
--- a/lib/usbhost/USB_Host_Shield_2.0/XBOXRECV.h
+++ /dev/null
@@ -1,276 +0,0 @@
-/* Copyright (C) 2012 Kristian Lauszus, TKJ Electronics. All rights reserved.
-
- This software may be distributed and modified under the terms of the GNU
- General Public License version 2 (GPL2) as published by the Free Software
- Foundation and appearing in the file GPL2.TXT included in the packaging of
- this file. Please note that GPL2 Section 2[b] requires that all works based
- on this software must also be made publicly available under the terms of
- the GPL2 ("Copyleft").
-
- Contact information
- -------------------
-
- Kristian Lauszus, TKJ Electronics
- Web      :  http://www.tkjelectronics.com
- e-mail   :  kristianl@tkjelectronics.com
-
- getBatteryLevel and checkStatus functions made by timstamp.co.uk found using BusHound from Perisoft.net
- */
-
-#ifndef _xboxrecv_h_
-#define _xboxrecv_h_
-
-#include "Usb.h"
-#include "xboxEnums.h"
-
-/* Data Xbox 360 taken from descriptors */
-#define EP_MAXPKTSIZE       32 // max size for data via USB
-
-/* Names we give to the 9 Xbox360 pipes */
-#define XBOX_CONTROL_PIPE   0
-#define XBOX_INPUT_PIPE_1   1
-#define XBOX_OUTPUT_PIPE_1  2
-#define XBOX_INPUT_PIPE_2   3
-#define XBOX_OUTPUT_PIPE_2  4
-#define XBOX_INPUT_PIPE_3   5
-#define XBOX_OUTPUT_PIPE_3  6
-#define XBOX_INPUT_PIPE_4   7
-#define XBOX_OUTPUT_PIPE_4  8
-
-// PID and VID of the different devices
-#define XBOX_VID                                0x045E  // Microsoft Corporation
-#define MADCATZ_VID                             0x1BAD  // For unofficial Mad Catz receivers
-#define JOYTECH_VID                             0x162E  // For unofficial Joytech controllers
-
-#define XBOX_WIRELESS_RECEIVER_PID              0x0719  // Microsoft Wireless Gaming Receiver
-#define XBOX_WIRELESS_RECEIVER_THIRD_PARTY_PID  0x0291  // Third party Wireless Gaming Receiver
-
-#define XBOX_MAX_ENDPOINTS   9
-
-/**
- * This class implements support for a Xbox Wireless receiver.
- *
- * Up to four controllers can connect to one receiver, if more is needed one can use a second receiver via the USBHub class.
- */
-class XBOXRECV : public USBDeviceConfig {
-public:
-        /**
-         * Constructor for the XBOXRECV class.
-         * @param  pUsb   Pointer to USB class instance.
-         */
-        XBOXRECV(USB *pUsb);
-
-        /** @name USBDeviceConfig implementation */
-        /**
-         * Address assignment and basic initilization is done here.
-         * @param  parent   Hub number.
-         * @param  port     Port number on the hub.
-         * @param  lowspeed Speed of the device.
-         * @return          0 on success.
-         */
-        uint8_t ConfigureDevice(uint8_t parent, uint8_t port, bool lowspeed);
-        /**
-         * Initialize the Xbox wireless receiver.
-         * @param  parent   Hub number.
-         * @param  port     Port number on the hub.
-         * @param  lowspeed Speed of the device.
-         * @return          0 on success.
-         */
-        uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed);
-        /**
-         * Release the USB device.
-         * @return 0 on success.
-         */
-        uint8_t Release();
-        /**
-         * Poll the USB Input endpoins and run the state machines.
-         * @return 0 on success.
-         */
-        uint8_t Poll();
-
-        /**
-         * Get the device address.
-         * @return The device address.
-         */
-        virtual uint8_t GetAddress() {
-                return bAddress;
-        };
-
-        /**
-         * Used to check if the controller has been initialized.
-         * @return True if it's ready.
-         */
-        virtual bool isReady() {
-                return bPollEnable;
-        };
-
-        /**
-         * Used by the USB core to check what this driver support.
-         * @param  vid The device's VID.
-         * @param  pid The device's PID.
-         * @return     Returns true if the device's VID and PID matches this driver.
-         */
-        virtual bool VIDPIDOK(uint16_t vid, uint16_t pid) {
-                return ((vid == XBOX_VID || vid == MADCATZ_VID || vid == JOYTECH_VID) && (pid == XBOX_WIRELESS_RECEIVER_PID || pid == XBOX_WIRELESS_RECEIVER_THIRD_PARTY_PID));
-        };
-        /**@}*/
-
-        /** @name Xbox Controller functions */
-        /**
-         * getButtonPress(uint8_t controller, ButtonEnum b) will return true as long as the button is held down.
-         *
-         * While getButtonClick(uint8_t controller, ButtonEnum b) will only return it once.
-         *
-         * So you instance if you need to increase a variable once you would use getButtonClick(uint8_t controller, ButtonEnum b),
-         * but if you need to drive a robot forward you would use getButtonPress(uint8_t controller, ButtonEnum b).
-         * @param  b          ::ButtonEnum to read.
-         * @param  controller The controller to read from. Default to 0.
-         * @return            getButtonClick(uint8_t controller, ButtonEnum b) will return a bool, while getButtonPress(uint8_t controller, ButtonEnum b) will return a byte if reading ::L2 or ::R2.
-         */
-        uint8_t getButtonPress(ButtonEnum b, uint8_t controller = 0);
-        bool getButtonClick(ButtonEnum b, uint8_t controller = 0);
-        /**@}*/
-
-        /** @name Xbox Controller functions */
-        /**
-         * Return the analog value from the joysticks on the controller.
-         * @param  a          Either ::LeftHatX, ::LeftHatY, ::RightHatX or ::RightHatY.
-         * @param  controller The controller to read from. Default to 0.
-         * @return            Returns a signed 16-bit integer.
-         */
-        int16_t getAnalogHat(AnalogHatEnum a, uint8_t controller = 0);
-
-        /**
-         * Used to disconnect any of the controllers.
-         * @param controller The controller to disconnect. Default to 0.
-         */
-        void disconnect(uint8_t controller = 0);
-
-        /**
-         * Turn rumble off and all the LEDs on the specific controller.
-         * @param  controller The controller to write to. Default to 0.
-         */
-        void setAllOff(uint8_t controller = 0) {
-                setRumbleOn(0, 0, controller);
-                setLedOff(controller);
-        };
-
-        /**
-         * Turn rumble off the specific controller.
-         * @param  controller The controller to write to. Default to 0.
-         */
-        void setRumbleOff(uint8_t controller = 0) {
-                setRumbleOn(0, 0, controller);
-        };
-        /**
-         * Turn rumble on.
-         * @param lValue     Left motor (big weight) inside the controller.
-         * @param rValue     Right motor (small weight) inside the controller.
-         * @param controller The controller to write to. Default to 0.
-         */
-        void setRumbleOn(uint8_t lValue, uint8_t rValue, uint8_t controller = 0);
-        /**
-         * Set LED value. Without using the ::LEDEnum or ::LEDModeEnum.
-         * @param value      See:
-         * setLedOff(uint8_t controller), setLedOn(uint8_t controller, LED l),
-         * setLedBlink(uint8_t controller, LED l), and setLedMode(uint8_t controller, LEDMode lm).
-         * @param controller The controller to write to. Default to 0.
-         */
-        void setLedRaw(uint8_t value, uint8_t controller = 0);
-
-        /**
-         * Turn all LEDs off the specific controller.
-         * @param controller The controller to write to. Default to 0.
-         */
-        void setLedOff(uint8_t controller = 0) {
-                setLedRaw(0, controller);
-        };
-        /**
-         * Turn on a LED by using ::LEDEnum.
-         * @param l          ::OFF, ::LED1, ::LED2, ::LED3 and ::LED4 is supported by the Xbox controller.
-         * @param controller The controller to write to. Default to 0.
-         */
-        void setLedOn(LEDEnum l, uint8_t controller = 0);
-        /**
-         * Turn on a LED by using ::LEDEnum.
-         * @param l          ::ALL, ::LED1, ::LED2, ::LED3 and ::LED4 is supported by the Xbox controller.
-         * @param controller The controller to write to. Default to 0.
-         */
-        void setLedBlink(LEDEnum l, uint8_t controller = 0);
-        /**
-         * Used to set special LED modes supported by the Xbox controller.
-         * @param lm         See ::LEDModeEnum.
-         * @param controller The controller to write to. Default to 0.
-         */
-        void setLedMode(LEDModeEnum lm, uint8_t controller = 0);
-        /**
-         * Used to get the battery level from the controller.
-         * @param  controller The controller to read from. Default to 0.
-         * @return            Returns the battery level as an integer in the range of 0-3.
-         */
-        uint8_t getBatteryLevel(uint8_t controller = 0);
-        /**
-         * Used to check if a button has changed.
-         * @param  controller The controller to read from. Default to 0.
-         * @return            True if a button has changed.
-         */
-        bool buttonChanged(uint8_t controller = 0);
-
-        /**
-         * Used to call your own function when the controller is successfully initialized.
-         * @param funcOnInit Function to call.
-         */
-        void attachOnInit(void (*funcOnInit)(void)) {
-                pFuncOnInit = funcOnInit;
-        };
-        /**@}*/
-
-        /** True if a wireless receiver is connected. */
-        bool XboxReceiverConnected;
-        /** Variable used to indicate if the XBOX 360 controller is successfully connected. */
-        uint8_t Xbox360Connected[4];
-
-protected:
-        /** Pointer to USB class instance. */
-        USB *pUsb;
-        /** Device address. */
-        uint8_t bAddress;
-        /** Endpoint info structure. */
-        EpInfo epInfo[XBOX_MAX_ENDPOINTS];
-
-private:
-        /**
-         * Called when the controller is successfully initialized.
-         * Use attachOnInit(void (*funcOnInit)(void)) to call your own function.
-         * This is useful for instance if you want to set the LEDs in a specific way.
-         * @param controller The initialized controller.
-         */
-        void onInit(uint8_t controller);
-        void (*pFuncOnInit)(void); // Pointer to function called in onInit()
-
-        bool bPollEnable;
-
-        /* Variables to store the buttons */
-        uint32_t ButtonState[4];
-        uint32_t OldButtonState[4];
-        uint16_t ButtonClickState[4];
-        int16_t hatValue[4][4];
-        uint16_t controllerStatus[4];
-        bool buttonStateChanged[4]; // True if a button has changed
-
-        bool L2Clicked[4]; // These buttons are analog, so we use we use these bools to check if they where clicked or not
-        bool R2Clicked[4];
-
-        uint32_t checkStatusTimer; // Timing for checkStatus() signals
-
-        uint8_t readBuf[EP_MAXPKTSIZE]; // General purpose buffer for input data
-        uint8_t writeBuf[7]; // General purpose buffer for output data
-
-        void readReport(uint8_t controller); // read incoming data
-        void printReport(uint8_t controller, uint8_t nBytes); // print incoming date - Uncomment for debugging
-
-        /* Private commands */
-        void XboxCommand(uint8_t controller, uint8_t* data, uint16_t nbytes);
-        void checkStatus();
-};
-#endif