remove more unused libraries

1 files changed, 0 insertions, 145 deletions

diff --git a/lib/usbhost/USB_Host_Shield_2.0/cdcftdi.h b/lib/usbhost/USB_Host_Shield_2.0/cdcftdi.h
deleted file mode 100644
index b731252629..0000000000
--- a/lib/usbhost/USB_Host_Shield_2.0/cdcftdi.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
-
-This software may be distributed and modified under the terms of the GNU
-General Public License version 2 (GPL2) as published by the Free Software
-Foundation and appearing in the file GPL2.TXT included in the packaging of
-this file. Please note that GPL2 Section 2[b] requires that all works based
-on this software must also be made publicly available under the terms of
-the GPL2 ("Copyleft").
-
-Contact information
--------------------
-
-Circuits At Home, LTD
-Web      :  http://www.circuitsathome.com
-e-mail   :  support@circuitsathome.com
- */
-#if !defined(__CDCFTDI_H__)
-#define __CDCFTDI_H__
-
-#include "Usb.h"
-
-#define bmREQ_FTDI_OUT  0x40
-#define bmREQ_FTDI_IN   0xc0
-
-//#define bmREQ_FTDI_OUT                USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE
-//#define bmREQ_FTDI_IN         USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE
-
-#define FTDI_VID                        0x0403  // FTDI VID
-#define FTDI_PID                        0x6001  // FTDI PID
-
-#define FT232AM                         0x0200
-#define FT232BM                         0x0400
-#define FT2232                          0x0500
-#define FT232R                          0x0600
-
-// Commands
-#define FTDI_SIO_RESET                  0 /* Reset the port */
-#define FTDI_SIO_MODEM_CTRL             1 /* Set the modem control register */
-#define FTDI_SIO_SET_FLOW_CTRL          2 /* Set flow control register */
-#define FTDI_SIO_SET_BAUD_RATE          3 /* Set baud rate */
-#define FTDI_SIO_SET_DATA               4 /* Set the data characteristics of the port */
-#define FTDI_SIO_GET_MODEM_STATUS       5 /* Retrieve current value of modem status register */
-#define FTDI_SIO_SET_EVENT_CHAR         6 /* Set the event character */
-#define FTDI_SIO_SET_ERROR_CHAR         7 /* Set the error character */
-
-#define FTDI_SIO_RESET_SIO              0
-#define FTDI_SIO_RESET_PURGE_RX         1
-#define FTDI_SIO_RESET_PURGE_TX         2
-
-#define FTDI_SIO_SET_DATA_PARITY_NONE   (0x0 << 8 )
-#define FTDI_SIO_SET_DATA_PARITY_ODD    (0x1 << 8 )
-#define FTDI_SIO_SET_DATA_PARITY_EVEN   (0x2 << 8 )
-#define FTDI_SIO_SET_DATA_PARITY_MARK   (0x3 << 8 )
-#define FTDI_SIO_SET_DATA_PARITY_SPACE  (0x4 << 8 )
-#define FTDI_SIO_SET_DATA_STOP_BITS_1   (0x0 << 11)
-#define FTDI_SIO_SET_DATA_STOP_BITS_15  (0x1 << 11)
-#define FTDI_SIO_SET_DATA_STOP_BITS_2   (0x2 << 11)
-#define FTDI_SIO_SET_BREAK              (0x1 << 14)
-
-#define FTDI_SIO_SET_DTR_MASK           0x1
-#define FTDI_SIO_SET_DTR_HIGH           ( 1 | ( FTDI_SIO_SET_DTR_MASK  << 8))
-#define FTDI_SIO_SET_DTR_LOW            ( 0 | ( FTDI_SIO_SET_DTR_MASK  << 8))
-#define FTDI_SIO_SET_RTS_MASK           0x2
-#define FTDI_SIO_SET_RTS_HIGH           ( 2 | ( FTDI_SIO_SET_RTS_MASK << 8 ))
-#define FTDI_SIO_SET_RTS_LOW            ( 0 | ( FTDI_SIO_SET_RTS_MASK << 8 ))
-
-#define FTDI_SIO_DISABLE_FLOW_CTRL      0x0
-#define FTDI_SIO_RTS_CTS_HS             (0x1 << 8)
-#define FTDI_SIO_DTR_DSR_HS             (0x2 << 8)
-#define FTDI_SIO_XON_XOFF_HS            (0x4 << 8)
-
-#define FTDI_SIO_CTS_MASK               0x10
-#define FTDI_SIO_DSR_MASK               0x20
-#define FTDI_SIO_RI_MASK                0x40
-#define FTDI_SIO_RLSD_MASK              0x80
-
-class FTDI;
-
-class FTDIAsyncOper {
-public:
-
-        virtual uint8_t OnInit(FTDI *pftdi) {
-                return 0;
-        };
-
-        virtual uint8_t OnRelease(FTDI *pftdi) {
-                return 0;
-        };
-};
-
-
-// Only single port chips are currently supported by the library,
-//              so only three endpoints are allocated.
-#define FTDI_MAX_ENDPOINTS              3
-
-class FTDI : public USBDeviceConfig, public UsbConfigXtracter {
-        static const uint8_t epDataInIndex; // DataIn endpoint index
-        static const uint8_t epDataOutIndex; // DataOUT endpoint index
-        static const uint8_t epInterruptInIndex; // InterruptIN  endpoint index
-
-        FTDIAsyncOper *pAsync;
-        USB *pUsb;
-        uint8_t bAddress;
-        uint8_t bConfNum; // configuration number
-        uint8_t bNumIface; // number of interfaces in the configuration
-        uint8_t bNumEP; // total number of EP in the configuration
-        uint32_t qNextPollTime; // next poll time
-        bool bPollEnable; // poll enable flag
-        uint16_t wFTDIType; // Type of FTDI chip
-
-        EpInfo epInfo[FTDI_MAX_ENDPOINTS];
-
-        void PrintEndpointDescriptor(const USB_ENDPOINT_DESCRIPTOR* ep_ptr);
-
-public:
-        FTDI(USB *pusb, FTDIAsyncOper *pasync);
-
-        uint8_t SetBaudRate(uint32_t baud);
-        uint8_t SetModemControl(uint16_t control);
-        uint8_t SetFlowControl(uint8_t protocol, uint8_t xon = 0x11, uint8_t xoff = 0x13);
-        uint8_t SetData(uint16_t databm);
-
-        // Methods for recieving and sending data
-        uint8_t RcvData(uint16_t *bytes_rcvd, uint8_t *dataptr);
-        uint8_t SndData(uint16_t nbytes, uint8_t *dataptr);
-
-        // USBDeviceConfig implementation
-        uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed);
-        uint8_t Release();
-        uint8_t Poll();
-
-        virtual uint8_t GetAddress() {
-                return bAddress;
-        };
-
-        // UsbConfigXtracter implementation
-        void EndpointXtract(uint8_t conf, uint8_t iface, uint8_t alt, uint8_t proto, const USB_ENDPOINT_DESCRIPTOR *ep);
-
-        virtual bool VIDPIDOK(uint16_t vid, uint16_t pid) {
-                return (vid == FTDI_VID && pid == FTDI_PID);
-        }
-
-};
-
-#endif // __CDCFTDI_H__