commit 2f9f555add827bbc6b7e6e4a08b830b9825ada4f parent dd164a05669cb8c05ed091b31897a45a464556da Author: Ryan <fauxpark@gmail.com> Date: Sun, 25 Jun 2023 22:06:31 +1000 Move `TAP_CODE_DELAY` to data driven (#21363) Diffstat:
174 files changed, 269 insertions(+), 380 deletions(-)
diff --git a/keyboards/0xcb/1337/config.h b/keyboards/0xcb/1337/config.h @@ -18,8 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // clang-format off -#define TAP_CODE_DELAY 10 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/0xcb/1337/info.json b/keyboards/0xcb/1337/info.json @@ -18,6 +18,9 @@ {"pin_a": "F6", "pin_b": "F5"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "qmk_lufa_bootloader": { "led": "B0" }, diff --git a/keyboards/0xcb/static/config.h b/keyboards/0xcb/static/config.h @@ -16,8 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/0xcb/static/info.json b/keyboards/0xcb/static/info.json @@ -18,6 +18,9 @@ {"pin_a": "D0", "pin_b": "D1"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega328p", "bootloader": "usbasploader", "layout_aliases": { diff --git a/keyboards/7c8/framework/config.h b/keyboards/7c8/framework/config.h @@ -16,7 +16,5 @@ #pragma once -#define TAP_CODE_DELAY 16 - #define LEADER_TIMEOUT 250 #define LEADER_PER_KEY_TIMING 150 diff --git a/keyboards/7c8/framework/info.json b/keyboards/7c8/framework/info.json @@ -18,6 +18,9 @@ {"pin_a": "D0", "pin_b": "D1"} ] }, + "qmk": { + "tap_keycode_delay": 16 + }, "processor": "atmega328p", "bootloader": "usbasploader", "layouts": { diff --git a/keyboards/adm42/config.h b/keyboards/adm42/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 1 - #if defined(CONSOLE_ENABLE) #define DEBUG_MATRIX_SCAN_RATE #endif diff --git a/keyboards/adm42/info.json b/keyboards/adm42/info.json @@ -16,6 +16,9 @@ "driver": "WS2812", "sat_steps": 24 }, + "qmk": { + "tap_keycode_delay": 1 + }, "matrix_pins": { "cols": ["C6", "B6", "B5", "B4", "D7", "D6", "F0", "F1", "F4", "F5", "F6", "F7"], "rows": ["C7", "D5", "D3", "D2"] diff --git a/keyboards/adpenrose/akemipad/config.h b/keyboards/adpenrose/akemipad/config.h @@ -3,8 +3,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Audio functionality */ #define AUDIO_PIN C6 #define AUDIO_CLICKY diff --git a/keyboards/adpenrose/akemipad/info.json b/keyboards/adpenrose/akemipad/info.json @@ -23,6 +23,9 @@ {"pin_a": "B1", "pin_b": "B3"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/adpenrose/kintsugi/config.h b/keyboards/adpenrose/kintsugi/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - /* Underglow options: */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/adpenrose/kintsugi/info.json b/keyboards/adpenrose/kintsugi/info.json @@ -27,6 +27,9 @@ {"pin_a": "B7", "pin_b": "D5"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/adpenrose/obi/config.h b/keyboards/adpenrose/obi/config.h @@ -3,8 +3,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Underglow options: */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/adpenrose/obi/info.json b/keyboards/adpenrose/obi/info.json @@ -26,6 +26,9 @@ {"pin_a": "F1", "pin_b": "F0"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/ano/config.h b/keyboards/ano/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/ano/info.json b/keyboards/ano/info.json @@ -18,6 +18,9 @@ {"pin_a": "B12", "pin_b": "A14", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "STM32F303", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/aplyard/aplx6/rev2/config.h b/keyboards/aplyard/aplx6/rev2/config.h @@ -1,20 +0,0 @@ -/* -Copyright 2020 April Aplyard <alex.fragiou@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define TAP_CODE_DELAY 50 diff --git a/keyboards/aplyard/aplx6/rev2/info.json b/keyboards/aplyard/aplx6/rev2/info.json @@ -13,6 +13,9 @@ {"pin_a": "F5", "pin_b": "F4"} ] }, + "qmk": { + "tap_keycode_delay": 50 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/bandominedoni/config.h b/keyboards/bandominedoni/config.h @@ -137,5 +137,3 @@ // Initial velocity value (avoid using 127 since it is used as a special number in some sound sources.) # define MIDI_INITIAL_VELOCITY 117 #endif // MIDI_ENABLE - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/bandominedoni/info.json b/keyboards/bandominedoni/info.json @@ -26,6 +26,9 @@ } } }, + "qmk": { + "tap_keycode_delay": 10 + }, "ws2812": { "pin": "D3" }, diff --git a/keyboards/basketweave/config.h b/keyboards/basketweave/config.h @@ -20,5 +20,3 @@ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/basketweave/info.json b/keyboards/basketweave/info.json @@ -19,6 +19,9 @@ {"pin_a": "D7", "pin_b": "C0"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32a", "bootloader": "usbasploader", "layouts": { diff --git a/keyboards/boston/config.h b/keyboards/boston/config.h @@ -41,8 +41,6 @@ //The 3D-printed version of Boston uses APA106 LEDs, which are reversed #define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB -#define TAP_CODE_DELAY 15 - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/boston/info.json b/keyboards/boston/info.json @@ -18,6 +18,9 @@ {"pin_a": "C13", "pin_b": "F1", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 15 + }, "backlight": { "pin": "A6", "levels": 6, diff --git a/keyboards/cannonkeys/balance/config.h b/keyboards/cannonkeys/balance/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define TAP_CODE_DELAY 25 - #define DYNAMIC_KEYMAP_LAYER_COUNT 3 /* diff --git a/keyboards/cannonkeys/balance/info.json b/keyboards/cannonkeys/balance/info.json @@ -18,6 +18,9 @@ {"pin_a": "B5", "pin_b": "B6", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 25 + }, "indicators": { "caps_lock": "B12", "num_lock": "B14", diff --git a/keyboards/custommk/ergostrafer/config.h b/keyboards/custommk/ergostrafer/config.h @@ -16,8 +16,6 @@ #define SPI_MISO_PIN B4 #define SPI_MISO_PAL_MODE 5 -#define TAP_CODE_DELAY 10 - // Audio configuration #define AUDIO_PIN B8 #define AUDIO_PWM_DRIVER PWMD4 diff --git a/keyboards/custommk/ergostrafer/info.json b/keyboards/custommk/ergostrafer/info.json @@ -79,5 +79,8 @@ { "pin_a": "B12", "pin_b": "B14"}, { "pin_a": "B15", "pin_b": "A15"} ] + }, + "qmk": { + "tap_keycode_delay": 10 } } \ No newline at end of file diff --git a/keyboards/custommk/evo70/config.h b/keyboards/custommk/evo70/config.h @@ -20,6 +20,4 @@ #define OLED_DISABLE_TIMEOUT -#define TAP_CODE_DELAY 10 - #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL + 4 diff --git a/keyboards/custommk/evo70/info.json b/keyboards/custommk/evo70/info.json @@ -29,6 +29,9 @@ {"pin_a": "C7", "pin_b": "D5", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "backlight": { "pin": "B5", "levels": 17, diff --git a/keyboards/custommk/genesis/rev1/config.h b/keyboards/custommk/genesis/rev1/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/custommk/genesis/rev1/info.json b/keyboards/custommk/genesis/rev1/info.json @@ -28,6 +28,9 @@ {"pin_a": "D2", "pin_b": "D1", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "qmk-dfu", "layouts": { diff --git a/keyboards/custommk/genesis/rev2/config.h b/keyboards/custommk/genesis/rev2/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/custommk/genesis/rev2/info.json b/keyboards/custommk/genesis/rev2/info.json @@ -28,6 +28,9 @@ {"pin_a": "D2", "pin_b": "D1", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "qmk-dfu", "layouts": { diff --git a/keyboards/doodboard/duckboard/config.h b/keyboards/doodboard/duckboard/config.h @@ -1,20 +0,0 @@ -/* Copyright 2020-2021 doodboard - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -/* media key slowdown for windows */ -#define TAP_CODE_DELAY 20 diff --git a/keyboards/doodboard/duckboard/info.json b/keyboards/doodboard/duckboard/info.json @@ -18,6 +18,9 @@ {"pin_a": "F5", "pin_b": "F6", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 20 + }, "rgblight": { "led_count": 8 }, diff --git a/keyboards/doodboard/duckboard_r2/config.h b/keyboards/doodboard/duckboard_r2/config.h @@ -1,20 +0,0 @@ -/* Copyright 2020-2021 doodboard - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -/* media key slowdown for windows */ -#define TAP_CODE_DELAY 20 diff --git a/keyboards/doodboard/duckboard_r2/info.json b/keyboards/doodboard/duckboard_r2/info.json @@ -18,6 +18,9 @@ {"pin_a": "F6", "pin_b": "F5", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 20 + }, "rgblight": { "led_count": 8 }, diff --git a/keyboards/draytronics/daisy/config.h b/keyboards/draytronics/daisy/config.h @@ -18,8 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/draytronics/daisy/info.json b/keyboards/draytronics/daisy/info.json @@ -19,6 +19,9 @@ {"pin_a": "D0", "pin_b": "D1"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "rgblight": { "saturation_steps": 8, "brightness_steps": 8, diff --git a/keyboards/dyz/dyz40/config.h b/keyboards/dyz/dyz40/config.h @@ -17,6 +17,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work - #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/dyz/dyz40/info.json b/keyboards/dyz/dyz40/info.json @@ -13,6 +13,9 @@ {"pin_a": "D1", "pin_b": "D0"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "rgblight": { "led_count": 13, "hue_steps": 10, diff --git a/keyboards/dyz/dyz60/config.h b/keyboards/dyz/dyz60/config.h @@ -17,6 +17,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work - #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/dyz/dyz60/info.json b/keyboards/dyz/dyz60/info.json @@ -39,6 +39,9 @@ {"pin_a": "D0", "pin_b": "D1"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "indicators": { "caps_lock": "F1" }, diff --git a/keyboards/dyz/dyz60_hs/config.h b/keyboards/dyz/dyz60_hs/config.h @@ -17,5 +17,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/dyz/dyz60_hs/info.json b/keyboards/dyz/dyz60_hs/info.json @@ -37,6 +37,9 @@ "pid": "0x001A", "device_version": "0.0.1" }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "community_layouts": ["60_ansi", "60_ansi_split_bs_rshift", "60_tsangan_hhkb", "60_iso", "60_iso_split_bs_rshift"], diff --git a/keyboards/dyz/dyz_tkl/config.h b/keyboards/dyz/dyz_tkl/config.h @@ -17,6 +17,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work - #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/dyz/dyz_tkl/info.json b/keyboards/dyz/dyz_tkl/info.json @@ -34,6 +34,9 @@ "indicators": { "caps_lock": "D2" }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "community_layouts": ["tkl_f13_ansi", "tkl_f13_iso"], diff --git a/keyboards/dyz/selka40/config.h b/keyboards/dyz/selka40/config.h @@ -17,6 +17,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work - #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/dyz/selka40/info.json b/keyboards/dyz/selka40/info.json @@ -39,6 +39,9 @@ {"pin_a": "D6", "pin_b": "D7"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "indicators": { "caps_lock": "B1", "num_lock": "B3", diff --git a/keyboards/ebastler/isometria_75/rev1/config.h b/keyboards/ebastler/isometria_75/rev1/config.h @@ -33,7 +33,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -#define TAP_CODE_DELAY 10 - /* ADC - will be used for battery monitoring once BT support is added */ /* #define ADC_PIN B0 */ diff --git a/keyboards/ebastler/isometria_75/rev1/info.json b/keyboards/ebastler/isometria_75/rev1/info.json @@ -26,6 +26,9 @@ {"pin_a": "C15", "pin_b": "C14", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "backlight": { "pin": "A9", "levels": 5, diff --git a/keyboards/fungo/rev1/config.h b/keyboards/fungo/rev1/config.h @@ -24,7 +24,6 @@ /*************************************/ #define MATRIX_IO_DELAY 15 // default 30 -#define TAP_CODE_DELAY 50 // default 0, disabled /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/fungo/rev1/info.json b/keyboards/fungo/rev1/info.json @@ -22,6 +22,9 @@ } } }, + "qmk": { + "tap_keycode_delay": 50 + }, "processor": "atmega32u4", "bootloader": "caterina", "debounce": 3, diff --git a/keyboards/geekboards/macropad_v2/config.h b/keyboards/geekboards/macropad_v2/config.h @@ -85,5 +85,3 @@ #define RGB_DISABLE_WHEN_USB_SUSPENDED #define WAIT_FOR_USB - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/geekboards/macropad_v2/info.json b/keyboards/geekboards/macropad_v2/info.json @@ -8,6 +8,9 @@ "pid": "0xA372", "device_version": "0.0.2" }, + "qmk": { + "tap_keycode_delay": 10 + }, "ws2812": { "pin": "A7", "driver": "pwm" diff --git a/keyboards/giabalanai/config.h b/keyboards/giabalanai/config.h @@ -168,8 +168,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define MIDI_INITIAL_VELOCITY 117 #endif // MIDI_ENABLE -#define TAP_CODE_DELAY 10 - /* 2021/01/22 added to shrink firmware size */ // NO_ACTION_TAPPING -1964 bytes, however, this disables Layer mods... // #define NO_ACTION_TAPPING diff --git a/keyboards/giabalanai/info.json b/keyboards/giabalanai/info.json @@ -55,6 +55,9 @@ } } }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/gmmk/gmmk2/p65/ansi/info.json b/keyboards/gmmk/gmmk2/p65/ansi/info.json @@ -8,6 +8,9 @@ "pid": "0x5045", "device_version": "0.0.1" }, + "qmk": { + "tap_keycode_delay": 10 + }, "rgb_matrix": { "driver": "AW20216" }, diff --git a/keyboards/gmmk/gmmk2/p65/config.h b/keyboards/gmmk/gmmk2/p65/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/gmmk/gmmk2/p65/iso/info.json b/keyboards/gmmk/gmmk2/p65/iso/info.json @@ -8,6 +8,9 @@ "pid": "0x504A", "device_version": "0.0.1" }, + "qmk": { + "tap_keycode_delay": 10 + }, "rgb_matrix": { "driver": "AW20216" }, diff --git a/keyboards/gmmk/gmmk2/p96/ansi/info.json b/keyboards/gmmk/gmmk2/p96/ansi/info.json @@ -8,6 +8,9 @@ "pid": "0x504B", "device_version": "0.0.1" }, + "qmk": { + "tap_keycode_delay": 10 + }, "rgb_matrix": { "driver": "AW20216" }, diff --git a/keyboards/gmmk/gmmk2/p96/config.h b/keyboards/gmmk/gmmk2/p96/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/gmmk/gmmk2/p96/iso/info.json b/keyboards/gmmk/gmmk2/p96/iso/info.json @@ -8,6 +8,9 @@ "pid": "0x505A", "device_version": "0.0.1" }, + "qmk": { + "tap_keycode_delay": 10 + }, "rgb_matrix": { "driver": "AW20216" }, diff --git a/keyboards/gmmk/pro/config.h b/keyboards/gmmk/pro/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/gmmk/pro/rev1/ansi/info.json b/keyboards/gmmk/pro/rev1/ansi/info.json @@ -21,6 +21,9 @@ {"pin_a": "C15", "pin_b": "C14"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "bootmagic": { "matrix": [1, 3] }, diff --git a/keyboards/gmmk/pro/rev1/iso/info.json b/keyboards/gmmk/pro/rev1/iso/info.json @@ -21,6 +21,9 @@ {"pin_a": "C15", "pin_b": "C14"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "bootmagic": { "matrix": [1, 3] }, diff --git a/keyboards/gmmk/pro/rev2/ansi/info.json b/keyboards/gmmk/pro/rev2/ansi/info.json @@ -21,6 +21,9 @@ {"pin_a": "C15", "pin_b": "C14"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "bootmagic": { "matrix": [1, 3] }, diff --git a/keyboards/gmmk/pro/rev2/iso/info.json b/keyboards/gmmk/pro/rev2/iso/info.json @@ -21,6 +21,9 @@ {"pin_a": "C15", "pin_b": "C14"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "bootmagic": { "matrix": [1, 3] }, diff --git a/keyboards/halokeys/elemental75/config.h b/keyboards/halokeys/elemental75/config.h @@ -15,8 +15,6 @@ */ #pragma once -#define TAP_CODE_DELAY 10 // tap_code function delay for register and unregister - /* animations enabled */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/halokeys/elemental75/info.json b/keyboards/halokeys/elemental75/info.json @@ -21,6 +21,9 @@ "tapping": { "term": 300 }, + "qmk": { + "tap_keycode_delay": 10 + }, "ws2812": { "pin": "A10" }, diff --git a/keyboards/handwired/d48/config.h b/keyboards/handwired/d48/config.h @@ -31,9 +31,6 @@ #define OLED_TIMEOUT 0 // #define OLED_SCROLL_TIMEOUT 1000 -/* Taps (encoder tap_code) */ -#define TAP_CODE_DELAY 10 - /* I2C */ //#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2 //#define PAL_MODE_STM32_ALTERNATE_OPENDRAIN (PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN) diff --git a/keyboards/handwired/d48/info.json b/keyboards/handwired/d48/info.json @@ -27,6 +27,9 @@ {"pin_a": "A0", "pin_b": "A1"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "STM32F303", "bootloader": "stm32-dfu", "board": "QMK_PROTON_C", diff --git a/keyboards/handwired/dactylmacropad/config.h b/keyboards/handwired/dactylmacropad/config.h @@ -1,22 +0,0 @@ -// Copyright 2022 bwprobably -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT - -#define TAP_CODE_DELAY 100 diff --git a/keyboards/handwired/dactylmacropad/info.json b/keyboards/handwired/dactylmacropad/info.json @@ -28,6 +28,9 @@ {"pin_a": "D1", "pin_b": "D0"} ] }, + "qmk": { + "tap_keycode_delay": 100 + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/daishi/config.h b/keyboards/handwired/daishi/config.h @@ -1,21 +0,0 @@ -/* -Copyright 2019 Crokto - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -/* Set delay for tap_code on rotary encoder */ -#define TAP_CODE_DELAY 10 diff --git a/keyboards/handwired/daishi/info.json b/keyboards/handwired/daishi/info.json @@ -18,6 +18,9 @@ {"pin_a": "F1", "pin_b": "F0", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "at90usb1286", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/handwired/mutepad/config.h b/keyboards/handwired/mutepad/config.h @@ -3,8 +3,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/mutepad/info.json b/keyboards/handwired/mutepad/info.json @@ -19,6 +19,9 @@ {"pin_a": "F4", "pin_b": "F5", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/handwired/terminus_mini/info.json b/keyboards/handwired/terminus_mini/info.json @@ -9,7 +9,8 @@ "device_version": "0.0.1" }, "tapping": { - "term": 150 + "term": 150, + "toggle": 1 }, "matrix_pins": { "cols": ["B0", "D0", "D5", "B6", "D4", "C7", "F7", "F6", "F5", "F4", "F1", "F0"], @@ -18,9 +19,6 @@ "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "halfkay", - "tapping": { - "toggle": 1 - }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/hfdkb/ac001/config.h b/keyboards/hfdkb/ac001/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 5 - /* ws2812 RGB LED */ #define RGB_MATRIX_LED_COUNT 5 diff --git a/keyboards/hfdkb/ac001/info.json b/keyboards/hfdkb/ac001/info.json @@ -20,6 +20,9 @@ "ws2812": { "pin": "A1" }, + "qmk": { + "tap_keycode_delay": 5 + }, "processor": "WB32FQ95", "bootloader": "wb32-dfu", "layouts": { diff --git a/keyboards/hub20/config.h b/keyboards/hub20/config.h @@ -72,9 +72,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define ENABLE_RGB_MATRIX_SOLID_SPLASH // #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH -/* Slow down key press speed to ensure computer picks it up */ -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/hub20/info.json b/keyboards/hub20/info.json @@ -22,6 +22,9 @@ {"pin_a": "A8", "pin_b": "A9"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "rgblight": { "led_count": 27 }, diff --git a/keyboards/inland/kb83/config.h b/keyboards/inland/kb83/config.h @@ -19,9 +19,6 @@ #define RGB_TRIGGER_ON_KEYDOWN -/* encoder resolution */ -#define TAP_CODE_DELAY 15 - /* DIP switch */ #define DIP_SWITCH_PINS \ { A9 } diff --git a/keyboards/inland/kb83/info.json b/keyboards/inland/kb83/info.json @@ -23,6 +23,9 @@ {"pin_a": "B14", "pin_b": "B13", "resolution": 4} ] }, + "qmk": { + "tap_keycode_delay": 15 + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/kapcave/arya/config.h b/keyboards/kapcave/arya/config.h @@ -22,8 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define TAP_CODE_DELAY 25 - #define DYNAMIC_KEYMAP_LAYER_COUNT 3 /* diff --git a/keyboards/kapcave/arya/info.json b/keyboards/kapcave/arya/info.json @@ -20,6 +20,9 @@ {"pin_a": "C15", "pin_b": "C14", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 25 + }, "processor": "STM32F072", "bootloader": "stm32-dfu", "community_layouts": ["alice_split_bs"], diff --git a/keyboards/keebio/bdn9/rev2/config.h b/keyboards/keebio/bdn9/rev2/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/keebio/bdn9/rev2/info.json b/keyboards/keebio/bdn9/rev2/info.json @@ -23,6 +23,9 @@ {"pin_a": "A10", "pin_b": "A9"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "STM32F072", "bootloader": "stm32-dfu", "matrix_pins": { diff --git a/keyboards/keebio/dsp40/rev1/config.h b/keyboards/keebio/dsp40/rev1/config.h @@ -16,8 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - #define BACKLIGHT_PWM_DRIVER PWMD3 #define BACKLIGHT_PWM_CHANNEL 1 #define BACKLIGHT_PAL_MODE 1 diff --git a/keyboards/keebio/dsp40/rev1/info.json b/keyboards/keebio/dsp40/rev1/info.json @@ -18,6 +18,9 @@ {"pin_a": "A1", "pin_b": "A2"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "backlight": { "pin": "A6", "levels": 7 diff --git a/keyboards/keycapsss/plaid_pad/config.h b/keyboards/keycapsss/plaid_pad/config.h @@ -1,20 +0,0 @@ -/* Copyright 2020 Ben Roesner (keycapsss.com) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -// Fix for volume controll with encoder (steadily in/decrease) -#define TAP_CODE_DELAY 60 diff --git a/keyboards/keycapsss/plaid_pad/info.json b/keyboards/keycapsss/plaid_pad/info.json @@ -7,6 +7,9 @@ "pid": "0x5050", "max_power": 100 }, + "qmk": { + "tap_keycode_delay": 60 + }, "matrix_pins": { "cols": ["B0", "D7", "D6", "D5"], "rows": ["C0", "C1", "C2", "C3"] diff --git a/keyboards/kiwikey/borderland/config.h b/keyboards/kiwikey/borderland/config.h @@ -3,8 +3,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/kiwikey/borderland/info.json b/keyboards/kiwikey/borderland/info.json @@ -18,6 +18,9 @@ {"pin_a": "F5", "pin_b": "F6"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "rgblight": { "saturation_steps": 8, "brightness_steps": 8, diff --git a/keyboards/lime/rev1/config.h b/keyboards/lime/rev1/config.h @@ -23,8 +23,6 @@ # define JOYSTICK_AXIS_RESOLUTION 8 #endif -#define TAP_CODE_DELAY 10 - #define SPLIT_USB_DETECT #ifdef WPM_ENABLE diff --git a/keyboards/lime/rev1/info.json b/keyboards/lime/rev1/info.json @@ -31,6 +31,9 @@ "tapping": { "term": 100 }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/linworks/whale75/config.h b/keyboards/linworks/whale75/config.h @@ -30,5 +30,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/linworks/whale75/info.json b/keyboards/linworks/whale75/info.json @@ -26,6 +26,9 @@ {"pin_a": "A15", "pin_b": "A14", "resolution": 2} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "backlight": { "pin": "A10", "levels": 5, diff --git a/keyboards/makrosu/config.h b/keyboards/makrosu/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/makrosu/info.json b/keyboards/makrosu/info.json @@ -18,6 +18,9 @@ {"pin_a": "E6", "pin_b": "D1"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "bootmagic": { "matrix": [0, 5] }, diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h @@ -82,5 +82,3 @@ # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define RGB_MATRIX_DISABLE_KEYCODES - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/info.json b/keyboards/mechlovin/adelais/rgb_led/rev2/info.json @@ -16,6 +16,9 @@ {"pin_a": "A4", "pin_b": "A3"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "rgblight": { "saturation_steps": 8, "brightness_steps": 8, diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h @@ -104,5 +104,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2 #endif - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/info.json b/keyboards/mechlovin/adelais/rgb_led/rev3/info.json @@ -16,6 +16,9 @@ {"pin_a": "B12", "pin_b": "B13"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "STM32F103", "bootloader": "stm32duino", "indicators": { diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev3/config.h b/keyboards/mechlovin/adelais/standard_led/arm/rev3/config.h @@ -1,3 +0,0 @@ -#pragma once - -#define TAP_CODE_DELAY 10 -\ No newline at end of file diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json b/keyboards/mechlovin/adelais/standard_led/arm/rev3/info.json @@ -9,6 +9,9 @@ {"pin_a": "B7", "pin_b": "B6"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "STM32F303", "board": "QMK_PROTON_C", "bootloader": "stm32-dfu", diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev4/config.h b/keyboards/mechlovin/adelais/standard_led/arm/rev4/config.h @@ -1,19 +0,0 @@ -/* -Copyright 2021 Mechlovin' Studio - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#pragma once - -#define TAP_CODE_DELAY 10 -\ No newline at end of file diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json b/keyboards/mechlovin/adelais/standard_led/arm/rev4/info.json @@ -9,6 +9,9 @@ {"pin_a": "B7", "pin_b": "B6"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "layout_aliases": { "LAYOUT_all": "LAYOUT_alice_split_bs" }, diff --git a/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h b/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h @@ -41,5 +41,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json b/keyboards/mechlovin/adelais/standard_led/avr/rev1/info.json @@ -10,6 +10,9 @@ {"pin_a": "C7", "pin_b": "C6"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "backlight": { "pin": "B5", "breathing": true diff --git a/keyboards/mechlovin/foundation/config.h b/keyboards/mechlovin/foundation/config.h @@ -27,5 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE - -#define TAP_CODE_DELAY 10 -\ No newline at end of file diff --git a/keyboards/mechlovin/foundation/info.json b/keyboards/mechlovin/foundation/info.json @@ -18,6 +18,9 @@ {"pin_a": "C13", "pin_b": "C14"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "indicators": { "caps_lock": "A1", "on_state": 0 diff --git a/keyboards/mechlovin/hex6c/config.h b/keyboards/mechlovin/hex6c/config.h @@ -20,7 +20,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PWM_DRIVER PWMD3 #define BACKLIGHT_PWM_CHANNEL 3 -#define TAP_CODE_DELAY 10 - #define WEAR_LEVELING_BACKING_SIZE 4096 #define WEAR_LEVELING_LOGICAL_SIZE 2048 diff --git a/keyboards/mechlovin/hex6c/info.json b/keyboards/mechlovin/hex6c/info.json @@ -18,6 +18,9 @@ {"pin_a": "A15", "pin_b": "A2"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "backlight": { "pin": "B0", "breathing": true diff --git a/keyboards/mechlovin/zed65/no_backlight/retro66/config.h b/keyboards/mechlovin/zed65/no_backlight/retro66/config.h @@ -1,20 +0,0 @@ -/* -Copyright 2022 Mechlovin' - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define TAP_CODE_DELAY 10 -\ No newline at end of file diff --git a/keyboards/mechlovin/zed65/no_backlight/retro66/info.json b/keyboards/mechlovin/zed65/no_backlight/retro66/info.json @@ -19,6 +19,9 @@ {"pin_a": "B6", "pin_b": "B9"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "indicators": { "caps_lock": "C14" }, diff --git a/keyboards/mechwild/mercutio/config.h b/keyboards/mechwild/mercutio/config.h @@ -17,8 +17,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - /* Define custom font */ #define OLED_FONT_H "lib/mercutiofont.c" diff --git a/keyboards/mechwild/mercutio/info.json b/keyboards/mechwild/mercutio/info.json @@ -18,6 +18,9 @@ {"pin_a": "B4", "pin_b": "B5"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega328p", "bootloader": "usbasploader", "layouts": { diff --git a/keyboards/mechwild/mokulua/mirrored/config.h b/keyboards/mechwild/mokulua/mirrored/config.h @@ -3,8 +3,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - #define OLED_FONT_H "keyboards/mechwild/mokulua/glcdfont.c" #define MASTER_LEFT diff --git a/keyboards/mechwild/mokulua/mirrored/info.json b/keyboards/mechwild/mokulua/mirrored/info.json @@ -18,6 +18,9 @@ {"pin_a": "D2", "pin_b": "B2"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "split": { "soft_serial_pin": "D3" }, diff --git a/keyboards/mechwild/mokulua/standard/config.h b/keyboards/mechwild/mokulua/standard/config.h @@ -3,8 +3,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - #define OLED_FONT_H "keyboards/mechwild/mokulua/glcdfont.c" #define MASTER_LEFT diff --git a/keyboards/mechwild/mokulua/standard/info.json b/keyboards/mechwild/mokulua/standard/info.json @@ -18,6 +18,9 @@ {"pin_a": "D2", "pin_b": "B2"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "split": { "soft_serial_pin": "D3" }, diff --git a/keyboards/mechwild/murphpad/config.h b/keyboards/mechwild/murphpad/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - #define OLED_FONT_H "keyboards/mechwild/murphpad/lib/murphpadfont.c" #define RGBLIGHT_EFFECT_BREATHING diff --git a/keyboards/mechwild/murphpad/info.json b/keyboards/mechwild/murphpad/info.json @@ -19,6 +19,9 @@ {"pin_a": "D2", "pin_b": "D3"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "bootmagic": { "matrix": [0, 1] }, diff --git a/keyboards/mechwild/obe/config.h b/keyboards/mechwild/obe/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - /* RGB settings, uncomment this define to enable RGB */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/mechwild/obe/info.json b/keyboards/mechwild/obe/info.json @@ -18,6 +18,9 @@ {"pin_a": "B5", "pin_b": "B4"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "indicators": { "caps_lock": "B9", "num_lock": "B8" diff --git a/keyboards/mechwild/puckbuddy/config.h b/keyboards/mechwild/puckbuddy/config.h @@ -24,8 +24,6 @@ #define CIRQUE_PINNACLE_SPI_DIVISOR 8 #define CIRQUE_PINNACLE_SPI_CS_PIN A4 -#define TAP_CODE_DELAY 10 - /* RGB settings, uncomment this define to enable RGB */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/mechwild/puckbuddy/info.json b/keyboards/mechwild/puckbuddy/info.json @@ -19,6 +19,9 @@ {"pin_a": "B3", "pin_b": "A15"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "indicators": { "caps_lock": "C13", "on_state": 0 diff --git a/keyboards/mechwild/waka60/config.h b/keyboards/mechwild/waka60/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - /* RGB settings, uncomment this define to enable RGB */ #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/mechwild/waka60/info.json b/keyboards/mechwild/waka60/info.json @@ -27,6 +27,9 @@ {"pin_a": "A3", "pin_b": "A2"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/mk65/config.h b/keyboards/mk65/config.h @@ -1,19 +0,0 @@ -/* Copyright 2022 DeskDaily - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#define TAP_CODE_DELAY 10 -\ No newline at end of file diff --git a/keyboards/mk65/info.json b/keyboards/mk65/info.json @@ -13,6 +13,9 @@ {"pin_a": "B1", "pin_b": "B2"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "matrix_pins": { diff --git a/keyboards/mode/m65s/config.h b/keyboards/mode/m65s/config.h @@ -45,5 +45,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -#define TAP_CODE_DELAY 50 diff --git a/keyboards/mode/m65s/info.json b/keyboards/mode/m65s/info.json @@ -8,6 +8,9 @@ "pid": "0x6583", "device_version": "0.0.1" }, + "qmk": { + "tap_keycode_delay": 50 + }, "matrix_pins": { "cols": ["C7", "A8", "A10", "A4", "A5", "A6", "C10", "A7", "C4", "C5", "A15", "B0", "B1", "B12", "B10", "B13"], "rows": ["A3", "B14", "B15", "C9", "C6", "C11"] diff --git a/keyboards/neito/config.h b/keyboards/neito/config.h @@ -29,7 +29,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - -/* Handle volume control issue with rotary encoder */ - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/neito/info.json b/keyboards/neito/info.json @@ -18,6 +18,9 @@ {"pin_a": "B7", "pin_b": "B0"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "backlight": { "pin": "B5", "levels": 5, diff --git a/keyboards/nightly_boards/octopadplus/config.h b/keyboards/nightly_boards/octopadplus/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/nightly_boards/octopadplus/info.json b/keyboards/nightly_boards/octopadplus/info.json @@ -19,6 +19,9 @@ {"pin_a": "D1", "pin_b": "D0", "resolution": 5} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "rgblight": { diff --git a/keyboards/nullbitsco/scramble/v1/config.h b/keyboards/nullbitsco/scramble/v1/config.h @@ -1,22 +0,0 @@ -/* -Copyright 2021 Jay Greco - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* NOTE: This config file is specific to AVR builds. */ - -#pragma once - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/nullbitsco/scramble/v1/info.json b/keyboards/nullbitsco/scramble/v1/info.json @@ -4,6 +4,9 @@ {"pin_a": "D6", "pin_b": "D7"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega328p", "bootloader": "usbasploader", "matrix_pins": { diff --git a/keyboards/nullbitsco/scramble/v2/config.h b/keyboards/nullbitsco/scramble/v2/config.h @@ -19,8 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - /* RP2040-specific defines*/ #define PICO_XOSC_STARTUP_DELAY_MULTIPLIER 64 #define RP2040_FLASH_GENERIC_03H diff --git a/keyboards/nullbitsco/scramble/v2/info.json b/keyboards/nullbitsco/scramble/v2/info.json @@ -4,6 +4,9 @@ {"pin_a": "GP24", "pin_b": "GP25"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "RP2040", "bootloader": "rp2040", "matrix_pins": { diff --git a/keyboards/om60/config.h b/keyboards/om60/config.h @@ -66,5 +66,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // iOS device need lessthan 100 #define USB_MAX_POWER_CONSUMPTION 100 #endif - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/om60/info.json b/keyboards/om60/info.json @@ -13,6 +13,9 @@ {"pin_a": "B4", "pin_b": "B5"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "rgblight": { "hue_steps": 10, "led_count": 69, diff --git a/keyboards/orthocode/config.h b/keyboards/orthocode/config.h @@ -16,8 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 10 - #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/orthocode/info.json b/keyboards/orthocode/info.json @@ -19,6 +19,9 @@ {"pin_a": "D1", "pin_b": "D0", "resolution": 1} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "rgblight": { "saturation_steps": 8, "brightness_steps": 8, diff --git a/keyboards/owlab/voice65/hotswap/config.h b/keyboards/owlab/voice65/hotswap/config.h @@ -91,5 +91,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define ENABLE_RGB_MATRIX_SOLID_SPLASH # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/owlab/voice65/hotswap/info.json b/keyboards/owlab/voice65/hotswap/info.json @@ -22,6 +22,9 @@ {"pin_a": "B4", "pin_b": "B5"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/owlab/voice65/soldered/config.h b/keyboards/owlab/voice65/soldered/config.h @@ -92,5 +92,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define ENABLE_RGB_MATRIX_SOLID_SPLASH # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/owlab/voice65/soldered/info.json b/keyboards/owlab/voice65/soldered/info.json @@ -22,6 +22,9 @@ {"pin_a": "B4", "pin_b": "B5"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "ws2812": { "pin": "B15" }, diff --git a/keyboards/peranekofactory/tone/rev1/config.h b/keyboards/peranekofactory/tone/rev1/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 100 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/peranekofactory/tone/rev1/info.json b/keyboards/peranekofactory/tone/rev1/info.json @@ -13,6 +13,9 @@ {"pin_a": "B5", "pin_b": "B4"} ] }, + "qmk": { + "tap_keycode_delay": 100 + }, "processor": "atmega32u4", "bootloader": "caterina", "matrix_pins": { diff --git a/keyboards/peranekofactory/tone/rev2/config.h b/keyboards/peranekofactory/tone/rev2/config.h @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define TAP_CODE_DELAY 100 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/peranekofactory/tone/rev2/info.json b/keyboards/peranekofactory/tone/rev2/info.json @@ -13,6 +13,9 @@ {"pin_a": "B5", "pin_b": "B4"} ] }, + "qmk": { + "tap_keycode_delay": 100 + }, "processor": "atmega32u4", "bootloader": "caterina", "matrix_pins": { diff --git a/keyboards/rgbkb/mun/config.h b/keyboards/rgbkb/mun/config.h @@ -133,7 +133,6 @@ #define TOUCH_UPDATE_INTERVAL 33 #define OLED_UPDATE_INTERVAL 33 -#define TAP_CODE_DELAY 5 #define WEAR_LEVELING_BACKING_SIZE 4096 #define WEAR_LEVELING_LOGICAL_SIZE 2048 diff --git a/keyboards/rgbkb/mun/rev1/info.json b/keyboards/rgbkb/mun/rev1/info.json @@ -30,6 +30,9 @@ {"pin_a": "B9", "pin_b": "A15"} ] }, + "qmk": { + "tap_keycode_delay": 5 + }, "split": { "soft_serial_pin": "A9" }, diff --git a/keyboards/rgbkb/sol3/config.h b/keyboards/rgbkb/sol3/config.h @@ -133,7 +133,6 @@ #define TOUCH_UPDATE_INTERVAL 33 #define OLED_UPDATE_INTERVAL 33 -#define TAP_CODE_DELAY 5 /* Audio Configuration */ #define AUDIO_PIN A4 diff --git a/keyboards/rgbkb/sol3/rev1/info.json b/keyboards/rgbkb/sol3/rev1/info.json @@ -49,6 +49,9 @@ } } }, + "qmk": { + "tap_keycode_delay": 5 + }, "processor": "STM32F303", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/rocketboard_16/config.h b/keyboards/rocketboard_16/config.h @@ -32,9 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define OLED_DISPLAY_128X64 #define OLED_FONT_H "custom_font.h" -// Allows for rotary encoder volume control -#define TAP_CODE_DELAY 20 - #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/rocketboard_16/info.json b/keyboards/rocketboard_16/info.json @@ -21,6 +21,9 @@ {"pin_a": "A2", "pin_b": "A3"} ] }, + "qmk": { + "tap_keycode_delay": 20 + }, "bootmagic": { "matrix": [4, 1] }, diff --git a/keyboards/sofle/keyhive/config.h b/keyboards/sofle/keyhive/config.h @@ -18,8 +18,6 @@ #pragma once -#define TAP_CODE_DELAY 10 - // OLED settings #define OLED_TIMEOUT 80000 #define OLED_BRIGHTNESS 90 diff --git a/keyboards/sofle/keyhive/info.json b/keyboards/sofle/keyhive/info.json @@ -43,6 +43,9 @@ } } }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/sofle/rev1/config.h b/keyboards/sofle/rev1/config.h @@ -1,3 +0,0 @@ -#pragma once - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/sofle/rev1/info.json b/keyboards/sofle/rev1/info.json @@ -31,6 +31,9 @@ "tapping": { "term": 100 }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32u4", "bootloader": "caterina", "layouts": { diff --git a/keyboards/tkw/grandiceps/config.h b/keyboards/tkw/grandiceps/config.h @@ -18,7 +18,6 @@ #define SELECT_SOFT_SERIAL_SPEED 1 #define MATRIX_IO_DELAY 5 -#define TAP_CODE_DELAY 10 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/tkw/grandiceps/info.json b/keyboards/tkw/grandiceps/info.json @@ -34,6 +34,9 @@ } } }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "STM32F411", "bootloader": "stm32-dfu", "board": "BLACKPILL_STM32_F411", diff --git a/keyboards/tkw/stoutgat/v1/config.h b/keyboards/tkw/stoutgat/v1/config.h @@ -1,20 +0,0 @@ -/*Copyright 2020 Thys de Wet - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/tkw/stoutgat/v1/info.json b/keyboards/tkw/stoutgat/v1/info.json @@ -19,6 +19,9 @@ {"pin_a": "B0", "pin_b": "B1"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "atmega32a", "bootloader": "usbasploader", "community_layouts": ["65_iso", "65_ansi"], diff --git a/keyboards/tkw/stoutgat/v2/config.h b/keyboards/tkw/stoutgat/v2/config.h @@ -16,7 +16,6 @@ #pragma once #define MATRIX_IO_DELAY 5 -#define TAP_CODE_DELAY 10 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD diff --git a/keyboards/tkw/stoutgat/v2/info.json b/keyboards/tkw/stoutgat/v2/info.json @@ -27,6 +27,9 @@ {"pin_a": "B12", "pin_b": "B13"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "community_layouts": ["65_iso", "65_ansi"], "layouts": { "LAYOUT_65_ansi": { diff --git a/keyboards/yandrstudio/nz67v2/config.h b/keyboards/yandrstudio/nz67v2/config.h @@ -16,8 +16,6 @@ #pragma once -#define TAP_CODE_DELAY 15 - /* RGB Matrix */ #ifdef RGB_MATRIX_ENABLE diff --git a/keyboards/yandrstudio/nz67v2/info.json b/keyboards/yandrstudio/nz67v2/info.json @@ -23,6 +23,9 @@ {"pin_a": "A9", "pin_b": "A10"} ] }, + "qmk": { + "tap_keycode_delay": 15 + }, "layouts": { "LAYOUT_all": { "layout": [